Arte SheetsLearn. Try. Understand.

Process Safety, API 521 Flare Systems & Thermal Radiation

Point-Source Thermal Radiation: A Flare-Modelling Illustration

Explore inverse-square heat-flux arithmetic for an ideal point source, and understand why it cannot establish a flare safety perimeter by itself.

A simplified point-source model

An ideal isotropic point source distributes radiated power over a sphere. For a hypothetical total heat release Q in MW, radiated fraction f, atmospheric transmission τ and distance d in metres, the simple flux estimate is τ × f × Q × 1,000 / (4πd²) in kW/m². This is a mathematical model, not a measured heat flux.

A real flare is an extended flame. Its size, wind-driven tilt and location, release conditions, atmospheric conditions and surrounding equipment affect exposure. The point-source approximation can be especially limited near the flame. A low modeled value or a calculated zero radius does not establish a safe exclusion zone.

Hypothetical parametersDistance from ideal sourceModeled flux
Q = 800 MW; f = 0.25; τ = 0.9545 m7.47 kW/m²
Same hypothetical parameters60 m4.20 kW/m²

Calculate modeled heat flux

Enter Q in MW in B2, radiated fraction in B3, atmospheric transmission in B4 and source-to-receptor distance in metres in B5. Fractions are dimensionless and must be between 0 and 1. The formula returns the ideal point-source result only.

=IF(COUNT(B2:B5)<>4,"Enter all numeric inputs",IF(OR(B2<0,B3<0,B3>1,B4<0,B4>1,B5<=0),"Check example inputs",ROUND(B2*1000*B3*B4/(4*PI()*B5^2),2)))

Design and safety context

Flare siting, operating limits and personnel exclusion areas require an approved scenario-specific assessment, the applicable edition of relevant standards, and qualified process-safety engineers. Flame geometry, wind, changing release rates and other hazards cannot be resolved by this one equation. This example does not establish API 521 compliance or prescribe a boundary.

Try the example

Use the original values or change them to test your understanding.

Further reading