Arte SheetsLearn. Try. Understand.

Activated-Sludge Biological Treatment, ASCE 2-06 Fine-Bubble SOTR to Field AOTR

ASCE Fine-Bubble Diffuser SOTR to Field AOTR Formula

Calculate Dissolved-Oxygen Driving Deficit Ratio, Arrhenius Theta Temperature Factor, Overall Field-to-Clean-Water Transfer Ratio, and Actual Oxygen Transfer Rate AOTR (kg O2/h).

Buying blowers straight off a brochure 185 kg/h clean-water SOTR curve starves nitrifying bacteria—because surfactants (alpha = 0.58), fouling, and 2.0 mg/L DO cut real AOTR to 74 kg/h

Diffuser vendors test EPDM / Polyurethane Fine-Bubble Membrane Discs under ASCE 2-06 Clean-Water Standard Conditions (SOTR: 20°C tap water, 0.0 mg/L dissolved oxygen, 1 atm, brand-new pores). Inside an active mixed-liquor aeration basin, surfactants coat rising 2-mm bubbles (alpha factor 0.40–0.65), carbonate/bio-slime stiffens membrane slits (Fouling factor F = 0.65–0.90), dissolved salts depress saturation (beta ~= 0.95), maintaining aerobic residual CDO = 2.0 mg/L shrinks the concentration driving gradient (beta * Csat,T - CDO) / Csat,20, and basin temperature T (°C) scales diffusivity via theta^(T - 20) (theta = 1.024). Combining all five terms yields **Field Actual Oxygen Transfer Rate AOTR = SOTR * alpha * F * ((beta * Csat,T - CDO) / Csat,20) * (1.024^(T - 20)) (kg O2/h, typically just 35%–45% of SOTR**).

Verify on a 4.5-m Deep Municipal Nitrification Basin—Brochure_Clean-Water_SOTR = 185 kg O2/h (B2), Surfactant_alpha = 0.58 (B3), Membrane_Fouling_F = 0.88 (B4), Salinity_beta = 0.96 (B5), Field_Depth-Corrected_Csat,T = 10.4 mg/L (B6), Target_Basin_DO = 2.00 mg/L (B7), Clean-Water_20°C_Csat,20 = 11.2 mg/L (B8), and Basin_Temp T = 24.0°C (B9): DO Driving-Deficit Ratio equals 0.713 (E2), Arrhenius Temperature Factor equals 1.0995 (E3), Overall Field Correction AOTR / SOTR equals 0.400 (40.0%. E4), delivering 74.0 kg O2/h of real biological oxygen (E5).

ASCE 2-06 Fine-Bubble Transfer KPI (SOTR=185 kg O2/h, Csat20=11.2 mg/L)FormulaVerified Output
DO Driving-Force Ratio(beta * Field_CsatT - Target_DO) / Std_Csat200.713 (0.397 @ 4.2 mg/L over-aeration)
Arrhenius Temp Factor1.024 ^ (Basin_Temp_C - 20)1.0995 @ 24°C (1.2981 @ 31°C summer)
Field-to-Standard Ratio (AOTR/SOTR)alpha * Fouling_F * DO_Ratio * Temp_Factor0.400 (0.126 = 87.4% transfer loss)
Actual Field AOTR (kg O2/h)Clean_Water_SOTR_kg_hr * Field_Ratio74.0 kg O2/h (23.3 kg O2/h blower stall)

ASCE / WEF MOP 8 Alpha-Beta-Theta-Fouling Field Oxygen Transfer Formula

Validate SOTR > 0 kg/h, alpha in [0.20, 1.00], Fouling F in [0.40, 1.00], Salinity beta in [0.70, 1.00], Field Csat,T in [5.0, 18.0] mg/L, Operating DO in [0, beta * Csat,T - 0.5] mg/L, Std Csat,20 in [8.0, 16.0] mg/L, and Temp T in [4, 40]°C.

=LET(st_r, B2, al_f, B3, fl_f, B4, bt_s, B5, cs_t, B6, do_m, B7, cs_z, B8, tp_c, B9, df_r, (bt_s * cs_t - do_m) / cs_z, th_t, 1.024 ^ (tp_c - 20), rt_x, al_f * fl_f * df_r * th_t, IF(OR(st_r <= 0, al_f < 0.2, al_f > 1, fl_f < 0.4, fl_f > 1, bt_s < 0.7, bt_s > 1, cs_t < 5, cs_t > 18, do_m < 0, do_m > bt_s * cs_t - 0.5, cs_z < 8, cs_z > 16, tp_c < 4, tp_c > 40), "Invalid AOTR Input", ROUND(st_r * rt_x, 1)))

Aged Fouled Discs + Detergent Slug + High DO Setpoint (alpha=0.36, F=0.68, DO=4.2 mg/L) Check

Dump high-surfactant laundry wastewater (B3 = 0.36) onto 6-year-old scaled EPDM discs (B4 = 0.68, B5 = 0.94) during a B9 = 31°C heatwave (Csat,T drops to B6 = 9.2 mg/L) while an uncalibrated probe holds B7 = 4.2 mg/L DO: Field Ratio E4 collapses to 0.126, slashing real oxygen transfer E5 to 23.3 kg O2/h (3.2x blower kWh waste).

=IF(ISTEXT(E5), E5, ROUND(B3 * B4 * ((B5 * B6 - B7) / B8) * (1.024 ^ (B9 - 20)), 3))

Try the example

Use the original values or change them to test your understanding.

Further reading