Arte SheetsLearn. Try. Understand.

Rock Mechanics, Tunneling & Underground Mining, Bieniawski RMR89 Classification

Bieniawski Rock Mass Rating (RMR89) & Tunnel Load Formula

Calculate Basic RMR89 (0–100), Strike/Dip Orientation-Adjusted RMR89, Serafim-Pereira Deformation Modulus Em (GPa), and Unal Tunnel Roof Support Load Pressure (kPa).

Ignoring adverse joint dip orientation and fault gouge drops tunnel rock modulus 15x from 33.5 GPa to 2.24 GPa

Z. T. Bieniawski’s (1989) Geomechanics Rock Mass Rating (RMR89) scores underground tunnel headings and mine drifts across five additive parameters (0–100 basic points): 1) Intact Rock UCS (0–15 pts) + 2) Deere RQD (3–20 pts -> combined 3–35 pts), 3) Discontinuity Spacing (5–20 pts) + 4) Joint Wall Condition (0–30 pts -> combined 5–50 pts), and 5) Groundwater Inflow (0–15 pts), followed by 6) Tunnel Strike & Dip Orientation Penalty Delta_RMRorient (0 very favorable to -12 pts when slickensided joints dip 20°–45° against the heading). From Adjusted RMRtot, Serafim & Pereira (1983) predict In-Situ Rock Mass Deformation Modulus E_m = 10^((RMRtot - 10) / 40) (GPa, valid across RMR <= 50 and widely benchmarked up to RMR ~ 75), while Unal (1983) sizes **Tunnel Crown Support Load Pressure Proof = ((100 - RMRtot) / 100) * gammarock * B** (kPa) across Excavation Span B (m) and Rock Unit Weight gammarock (kN/m³).

Verify on an 8.0 m Span Highway Rock Tunnel in Jointed Granodiorite (gamma = 26.5 kN/m³)—UCS+RQD_Score = 29 pts (B2), Spacing+Condition_Score = 37 pts (B3), Damp_Groundwater_Score = 10 pts (B4), Fair_Orientation_Penalty = -5 pts (B5), Tunnel_Span B = 8.0 m (B6), and Unit_Weight gamma = 26.5 kN/m³ (B7): Basic RMR89 equals 76 (E2), Adjusted RMR89 equals 71 (Class II Good Rock, E3), Rock Mass Modulus E_m equals 33.50 GPa (E4), and Unal Crown Support Pressure equals 61.5 kPa (E5). In a cloud collaboration tunnel-mapping workbook, face geologists (suggester role) propose updated B2:B5 scores per round with whole-cell comments; note that the Arte Sheets ChatGPT 0.1.0 connector is currently In review / Not published (when used on scoped OAuth cloud workbooks, read_range reads raw cell inputs/formulas up to 200 cells without recalculating engine outputs, while owner/editor reviewers verify live E2:E5 recalculation in Arte Sheets before accepting suggestions).

Bieniawski RMR89 Tunnel KPI (Span B=8.0 m, gamma=26.5 kN/m³: Class II vs Fault Class IV)FormulaVerified Output
Basic Unadjusted RMR89 (0–100)UCS_RQD_Pts + Spacing_Cond_Pts + Water_Pts76 pts (36 pts sheared fault zone)
Orientation-Adjusted RMR89Basic_RMR89 + Strike_Dip_Penalty_Pts71 pts Class II (24 pts Class IV Poor)
Serafim-Pereira Modulus Em (GPa)10 ^ ((Adjusted_RMR89 - 10) / 40)33.50 GPa (2.24 GPa 15x softer)
Unal Crown Support Load (kPa)((100 - Adjusted_RMR89) / 100) * gamma * Span_m61.5 kPa (161.1 kPa steel ribs + shotcrete)

Bieniawski RMR89, Serafim-Pereira Deformation Modulus & Unal Support Pressure Formula

Validate UCS+RQD in [3, 35], Spacing+Condition in [5, 50], Groundwater in [0, 15], Orientation_Adjustment in [-12, 0], positive Adjusted RMR in [1, 100], Span B in [1.5, 30] m, and Unit_Weight in [18, 33] kN/m³.

=LET(p1_s, B2, p2_s, B3, p3_s, B4, pa_d, B5, bs_m, B6, gr_k, B7, rt_s, p1_s + p2_s + p3_s + pa_d, IF(OR(p1_s < 3, p1_s > 35, p2_s < 5, p2_s > 50, p3_s < 0, p3_s > 15, pa_d < -12, pa_d > 0, rt_s < 1, bs_m < 1.5, bs_m > 30, gr_k < 18, gr_k > 33), "Invalid RMR89 Input", ROUND(((100 - rt_s) / 100) * gr_k * bs_m, 1)))

Water-Bearing Clay-Gouge Fault Zone (RMR = 24 Class IV Poor Rock) Squeeze Check

Advance the heading into a dripping, adversely dipping fault shear zone (B2 = 14, B3 = 18, B4 = 4, B5 = -12): Adjusted RMR89 plunges to 24 (Class IV Poor Rock, E3), Deformation Modulus E4 collapses 15x to 2.24 GPa, and Unal Roof Support Load E5 jumps 2.6x to 161.1 kPa—demanding forepoling umbrella arch pipes, lattice girders, and immediate fiber-reinforced shotcrete.

=IF(ISTEXT(E5), E5, ROUND(10 ^ (((B2 + B3 + B4 + B5) - 10) / 40), 2))

Try the example

Use the original values or change them to test your understanding.

Further reading