Mineral Processing, Quarry & Aggregate Comminution, Blake Jaw Crusher Mechanics
Blake Jaw Crusher Nip Angle & Critical RPM Formula
Calculate Crushing-Chamber Nip Angle alpha (deg), Gape-to-CSS Reduction Ratio, Rose & English Critical Toggle Flywheel Speed Ncrit (RPM), and Volumetric Wedge Throughput (t/h).
Exceed a 26° jaw-crusher nip angle and wet quarry boulders shoot UPWARD out of the feed gape like watermelon seeds
Inside a Primary Overhead-Eccentric or Double-Toggle Blake Jaw Crusher (Top Feed Gape G mm, Closed-Side Discharge Setting CSS mm, Bottom Horizontal Throw Stroke s mm, Vertical Chamber Height H mm, Jaw Plate Width W mm), friction between corrugated manganese-steel liners and hard granite/basalt (mu ~= 0.25–0.30 -> friction angle ~14°–17°) can grip a boulder ONLY when **Chamber Nip Angle alpha = ATAN((G - CSS) / H) * 180 / PI() stays <= 24°–26°** (tan(alpha) <= 2 * mu). Even more counterintuitively, spinning the eccentric flywheel faster does not monotonically raise tonnage: by Rose & English’s (1967) Free-Fall Critical Speed Law, crushed rock needs one retreating half-stroke (t = 30 / N s) to fall freely through vertical wedge height h = (s / 1,000) / tan(alpha), peaking at **Ncrit = 66.433 * SQRT(tan(alpha) / (s / 1,000)) (RPM—above Ncrit, the advancing jaw catches the prism mid-air and chokes** throughput). Operating at Nop = 0.82 * Ncrit with 0.45 broken-rock void swell yields **Wedge Discharge Throughput Q = (W / 1,000) * ((CSS + s / 2) / 1,000) * ((s / 1,000) / tan(alpha)) * 0.45 * Nop * 60 * rho_b** (t/h).
Verify on a 900 x 1,200 mm Primary Quarry Jaw Crusher—Top_Gape G = 900 mm (B2), Closed-Side_Setting CSS = 110 mm (B3), Eccentric_Stroke s = 32.0 mm (B4), Chamber_Height H = 1,850 mm (B5), Jaw_Width W = 1,200 mm (B6), and Loose_Bulk_Density rho_b = 1.65 t/m³ (B7): Nip Angle alpha equals a safe 23.12° (<= 26°. E2), Reduction Ratio G / CSS equals 8.18:1 (E3), Rose-English Critical Speed Ncrit equals 242.7 RPM (~199 RPM operating, E4), delivering 100.4 t/h wedge discharge (E5).
| Blake Jaw Crusher KPI (900x1200 mm, Stroke s=32 mm, Bulk Density=1.65 t/m³) | Formula | Verified Output |
|---|---|---|
| Chamber Nip Angle alpha (deg) | ATAN((Gape_mm - CSS_mm) / Height_mm) * 180 / PI() | 23.12° safe (31.43° ROCK EJECTION) |
| Gape-to-CSS Reduction Ratio | Top_Gape_G_mm / Closed_Side_CSS_mm | 8.18 : 1 (12.00 : 1 over-choked) |
| Rose-English Critical Speed (RPM) | 66.433 * SQRT(tan_alpha / (Stroke_mm / 1000)) | 242.7 RPM (~199 RPM @ 82% Ncrit) |
| Wedge Prism Throughput (t/h) | W * (CSS+s/2) * (s/tanA) * 0.45 * 0.82*Nc * 60 * rho | 100.4 t/h (60.6 t/h @ tight 75 mm CSS) |
Blake Nip-Angle Grip Limit & Rose-English Free-Fall Critical RPM Formula
Validate Gape G in [150, 2,500] mm, CSS in [15, 0.5 * G] mm, Stroke s in [5, 80] mm, Chamber_Height H >= G, Width W in [200, 3,500] mm, and Bulk_Density in [0.8, 3.5] t/m³.
=LET(gp_m, B2, cs_m, B3, st_m, B4, hc_m, B5, wj_m, B6, rb_t, B7, tn_a, (gp_m - cs_m) / hc_m, nc_r, 66.433 * SQRT(tn_a / (st_m / 1000)), IF(OR(gp_m < 150, gp_m > 2500, cs_m < 15, cs_m > 0.5 * gp_m, st_m < 5, st_m > 80, hc_m < gp_m, wj_m < 200, wj_m > 3500, rb_t < 0.8, rb_t > 3.5), "Invalid Crusher Input", ROUND((wj_m / 1000) * ((cs_m + st_m / 2) / 1000) * ((st_m / 1000) / tn_a) * 0.45 * (0.82 * nc_r) * 60 * rb_t, 1)))Shallow Chamber + Tight 75 mm CSS (H = 1,350 mm, CSS = 75 mm) Slippage & Choke Check
Tighten CSS to B3 = 75 mm in a short-jaw retrofit (B5 = 1,350 mm): Reduction Ratio jumps to 12.00:1 (E3), Nip Angle E2 climbs to 31.43° (exceeding 26°—boulders bounce and slip upward dangerously without gripping), and Throughput E5 drops -40% to 60.6 t/h.
=IF(ISTEXT(E5), E5, ROUND((ATAN((B2 - B3) / B5) * 180) / PI(), 2))Try the example
Use the original values or change them to test your understanding.