PFAS & VOC Drinking-Water Treatment, Bohart-Adams (1920) / Hutchins BDST Carbon Column
Bohart-Adams BDST Activated-Carbon Breakthrough Formula
Calculate Empty-Bed Contact Time EBCT (min), Critical Mass-Transfer Zone Bed Depth Z0 (m), Stoichiometric Saturation Time (h), and Bohart-Adams Breakthrough Service Time tb (h).
Pack an activated-carbon column shallower than Bohart-Adams critical depth Z0 and effluent breaks past Cb at t = 0—even with 100% virgin carbon
Granular Activated Carbon (GAC) Pressure Adsorbers stripping VOCs, pesticides, or free chlorine do NOT exhaust top-to-bottom like a flat piston—an S-shaped Mass-Transfer Zone (MTZ) travels downward at finite film/intraparticle kinetics k_a (L/(mg·h)). Solving the coupled solute wave across Dynamic Bed Adsorption Capacity N0 (g/L bed = 1,000 * N0 mg/L), Packed Depth Z (m), Influent Concentration C_0 (mg/L), Allowable Effluent Breakthrough C_b (mg/L), and Superficial Hydraulic Loading v (m/h -> **Empty-Bed Contact Time EBCT = (Z / v) * 60 min), G.S. Bohart & E.Q. Adams (1920) and Roy A. Hutchins (1973) formulated the linear Bed-Depth-Service-Time (BDST) Equation t_b = (((N0 * 1,000) * Z) / (C_0 * v)) - (1 / (k_a * C_0)) * ln((C_0 / C_b) - 1) (hours). Setting t_b = 0 isolates Critical Minimum Bed Depth Z_0 = (v / (k_a * N0 * 1,000)) * ln((C_0 / C_b) - 1)** (m)—the bare thickness needed just to prevent instantaneous t = 0 bleed-through.
Verify on a Municipal VOC GAC Lead Contactor—Dynamic_Capacity N0 = 42.0 g/L (B2), Carbon_Bed_Depth Z = 1.80 m (B3), Influent_Solute C_0 = 18.5 mg/L (B4), Breakthrough_Limit C_b = 0.90 mg/L (B5), Linear_Loading_Velocity v = 7.50 m/h (B6), and Rate_Constant k_a = 0.016 L/(mg·h) (B7): Empty-Bed Contact Time EBCT equals 14.4 min (E2), Critical Mass-Transfer Depth Z_0 equals 0.033 m (E3), Stoichiometric Zero-MTZ Time equals 544.9 h (E4), and Actual BDST Breakthrough Service Time equals 534.8 hours (22.3 days before lead-lag carbon swap. E5).
| Bohart-Adams / Hutchins BDST GAC KPI (N0=42 g/L, Cb=0.90 mg/L) | Formula | Verified Output |
|---|---|---|
| Empty-Bed Contact Time EBCT (min) | (Carbon_Depth_Z_m / Velocity_v_m_hr) * 60 | 14.4 min (1.9 min shallow fast bed) |
| Critical Minimum Depth Z0 (m) | (v / (ka * N0 * 1000)) * LN((C0 / Cb) - 1) | 0.033 m (0.165 m @ slow kinetics) |
| Stoichiometric Max Time (h) | ((N0_g_L * 1000) * Z_m) / (C0_mg_L * v_m_hr) | 544.9 h (28.1 h solvent spike) |
| BDST Service Time to Cb (h) | Stoich_Time_hr - (1 / (ka * C0)) * LN((C0/Cb) - 1) | 534.8 h (17.8 h early breakthrough) |
Bohart-Adams (1920) & Hutchins (1973) Linear BDST Carbon Column Formula
Validate Dynamic_Capacity N0 in [1, 350] g/L, Bed_Depth Z in [0.2, 12.0] m, Influent C_0 in [0.5, 1,000] mg/L, Breakthrough C_b in (0, 0.50 * C_0), Superficial_Velocity v in [0.5, 40.0] m/h, and Rate_Constant k_a in [0.0005, 2.0] L/(mg·h).
=LET(nz_g, B2, zb_m, B3, cz_m, B4, cb_m, B5, vs_h, B6, ka_r, B7, ln_t, LN((cz_m / cb_m) - 1), ts_h, ((nz_g * 1000) * zb_m) / (cz_m * vs_h), IF(OR(nz_g < 1, nz_g > 350, zb_m < 0.2, zb_m > 12, cz_m < 0.5, cz_m > 1000, cb_m <= 0, cb_m >= 0.5 * cz_m, vs_h < 0.5, vs_h > 40, ka_r < 0.0005, ka_r > 2), "Invalid BDST Input", ROUND(ts_h - (1 / (ka_r * cz_m)) * ln_t, 1)))Shallow Cartridge (Z = 0.45 m, v = 14 m/h) + Spill Surge (C_0 = 48 mg/L, k_a = 0.008) Check
Route a bulky, slower-diffusing industrial spill (B4 = 48.0 mg/L, B7 = 0.008 L/mg·h) at B6 = 14.0 m/h through a shallow B3 = 0.45 m skid canister: EBCT E2 plunges to 1.9 min, Critical Depth Z_0 E3 expands 5x to 0.165 m (37% of the entire canister), and Breakthrough Time E5 collapses 30-fold to just 17.8 hours.
=IF(ISTEXT(E5), E5, ROUND((B6 / (B7 * (B2 * 1000))) * LN((B4 / B5) - 1), 3))Try the example
Use the original values or change them to test your understanding.