Engineering
Ideal constant-specific-heat Brayton efficiency and compressor temperature
Explore the ideal Brayton pressure-ratio expression and isentropic compression temperature, with explicit thermodynamic assumptions.
Use an ideal cycle, not a measured engine efficiency
This cold-air-standard model assumes a calorically perfect gas with constant gamma, isentropic compression and expansion, constant-pressure heat addition and rejection, no pressure losses and no regeneration. It is not the propulsive or overall efficiency of an aircraft engine.
A higher pressure ratio increases this ideal expression, but it also raises compressor temperature. A real cycle needs adequate turbine inlet temperature and positive net work; this worksheet has no turbine temperature or component losses and cannot optimize an engine. Gamma=1.4 is an illustrative constant, not a universal high-temperature air property.
Use absolute pressures for the ratio and kelvin for inlet temperature. Require pressure ratio at least 1, gamma greater than 1 and positive absolute temperature. At ratio 1, the expression returns its zero-efficiency limit; this is a degenerate cycle, not a functioning power plant.
| Brayton Turbine Metric | Formula | Illustrative ratio 16, T1=288.15 K | Illustrative ratio 40, same inlet |
|---|---|---|---|
| Isentropic Temp Ratio T2 / T1 | B2 ^ ((B3 - 1) / B3) | 16 ^ (0.4/1.4) = 2.2082 | 40 ^ (0.4/1.4) = 2.8690 |
| Ideal Brayton Efficiency eta | 1 - (1 / (B2 ^ ((B3 - 1) / B3))) | 54.71% (0.5471) | 65.14% (0.6514) |
| Compressor Exit Temp T2 (K) | B4 * (B2 ^ ((B3 - 1) / B3)) | 636.29 K (363.1 °C) | 826.70 K (553.6 °C) |
Ideal Brayton Cycle Thermal Efficiency = 1 - (1 / r_p^((gamma - 1) / gamma))
Evaluates isentropic pressure-ratio efficiency from r_p (B2) and specific heat ratio gamma (B3).
=IF(COUNT(B2:B4)<>3,"Invalid inputs",IF(OR(B2<1,B3<=1,B4<=0),"Invalid inputs",ROUND(1 - (1 / (B2 ^ ((B3 - 1) / B3))), 4)))Isentropic Compressor Discharge Temperature T2 (Kelvin)
Multiplies absolute Kelvin inlet temperature B4 by isentropic temperature ratio.
=IF(COUNT(B2:B4)<>3,"Invalid inputs",IF(OR(B2<1,B3<=1,B4<=0),"Invalid inputs",ROUND(B4 * (B2 ^ ((B3 - 1) / B3)), 2)))Try the example
Use the original values or change them to test your understanding.