Arte SheetsLearn. Try. Understand.

Biogas Engineering & Anaerobic Co-Digestion, Buswell-Mueller (1952) & Boyle Stoichiometry

Buswell Anaerobic Biomethane Potential (BMP) Formula

Calculate Empirical Substrate Molar Mass (g/mol), Stoichiometric Dry Biogas Methane Share (%), Theoretical Biomethane Potential BMP (Nm³ CH4/kg VS), and Practical Yield (Nm³/t VS).

Co-digesting grease-trap lipids (C57H104O6) instead of starch/glucose (C6H12O6) nearly TRIPLES Buswell methane yield from 0.373 to 1.013 Nm³/kg VS while enriching biogas from 50% to 70.2% CH4

Arthur M. Buswell & H.F. Mueller (1952) and William C. Boyle (1976) balanced anaerobic methanogenesis of any organic volatile-solids formula C_c H_h O_o N_n (Molar Mass M = 12.011*c + 1.008*h + 15.999*o + 14.007*n g/mol) with water into CH4 + CO2 + NH3: every mole of substrate yields **nCH4 = (c / 2) + (h / 8) - (o / 4) - (3 * n / 8) moles of methane alongside nCO2 = c - nCH4 moles of carbon dioxide. Because nCH4 + nCO2 = c exactly, Dry Biogas Methane Concentration equals (nCH4 / c) * 100%, Theoretical Biomethane Potential (STP 22.414 L/mol) equals BMPth = (nCH4 * 22.414) / M (Nm³ CH4 / kg VS), and applying Anaerobic Biodegradability Fraction f_D (%, deducting recalcitrant lignin + ~5%–8% biomass synthesis) gives Practical Digester Yield YCH4 = BMPth * 1,000 * (f_D / 100)** (Nm³ CH4 / t VS).

Verify on Carbohydrate/Starch Feedstock (C_6 H12 O6) in a Mesophilic Digester—Carbon c = 6 (B2), Hydrogen h = 12 (B3), Oxygen o = 6 (B4), Nitrogen n = 0 (B5), and Volatile-Solids_Biodegradability f_D = 82.0% (B6): Formula Molar Mass equals 180.16 g/mol (E2), Stoichiometric Biogas Methane Share equals 50.0% CH4 (50% CO2. E3), Theoretical BMPth equals 0.373 Nm³/kg VS (E4), and Practical Methane Yield equals 306.1 Nm³ CH4/t VS (E5).

Buswell-Boyle Anaerobic Stoichiometry KPI (STP 22.414 L/mol)FormulaVerified Output
Empirical Molar Mass M (g/mol)12.011*c + 1.008*h + 15.999*o + 14.007*n180.16 g/mol glucose (885.45 triolein)
Dry Biogas CH4 Concentration (%)(((c/2) + (h/8) - (o/4) - (3*n/8)) / c) * 10050.0% CH4 starch (70.2% CH4 lipid fat)
Theoretical BMPth (Nm³ CH4/kg VS)(Moles_CH4 * 22.414) / Molar_Mass_g_mol0.373 Nm³/kg VS (1.013 Nm³/kg lipid)
Practical Yield (Nm³ CH4/t VS)Theoretical_BMP * 1000 * (Biodeg_fD_Pct / 100)306.1 Nm³/t VS (870.8 Nm³/t FOG boost)

Buswell-Mueller (1952) & Boyle C_c H_h O_o N_n Biomethane Stoichiometry Formula

Validate Carbon c in [1, 200], Hydrogen h in [1, 400], Oxygen o in [0, 150], Nitrogen n in [0, 50] (with positive nCH4 in (0.05 * c, c)), and Biodegradability f_D in [10, 98]%.

=LET(cc_a, B2, hh_a, B3, oo_a, B4, nn_a, B5, fd_p, B6, mm_g, 12.011 * cc_a + 1.008 * hh_a + 15.999 * oo_a + 14.007 * nn_a, nc_m, (cc_a / 2) + (hh_a / 8) - (oo_a / 4) - (3 * nn_a / 8), bm_p, (nc_m * 22.414) / mm_g, IF(OR(cc_a < 1, cc_a > 200, hh_a < 1, hh_a > 400, oo_a < 0, oo_a > 150, nn_a < 0, nn_a > 50, nc_m <= 0.05 * cc_a, nc_m >= cc_a, fd_p < 10, fd_p > 98), "Invalid Buswell Input", ROUND(bm_p * 1000 * (fd_p / 100), 1)))

Food-Waste Grease/Lipid Triolein Co-Digestion (C_57 H_104 O6, f_D = 86%) CHP Surge Check

Dose C57 H104 O6 triglyceride fat (B2 = 57, B3 = 104, B4 = 6, B5 = 0, B6 = 86%): Highly reduced hydrocarbon chains push Biogas Quality E3 to 70.2% CH4 and Theoretical BMPth E4 to 1.013 Nm³/kg VS, nearly tripling Practical Yield E5 to 870.8 Nm³ CH4/t VS (warning operators to ramp FOG slowly so long-chain fatty acids never foam or inhibit acetoclastic methanogens).

=IF(ISTEXT(E5), E5, LET(mm_g, 12.011 * B2 + 1.008 * B3 + 15.999 * B4 + 14.007 * B5, nc_m, (B2 / 2) + (B3 / 8) - (B4 / 4) - (3 * B5 / 8), ROUND((nc_m * 22.414) / mm_g, 3)))

Try the example

Use the original values or change them to test your understanding.

Further reading