Arte SheetsLearn. Try. Understand.

5-Axis CNC Die/Mold Machining & CAM Toolpaths, Ball-Nose Scallop & Effective Diameter

CNC Ball-Nose Scallop Cusp Height & Effective Vc Formula

Calculate 3D Mold Finishing Scallop Cusp Height h (um), Effective Engaged Cutting Diameter Deff (mm), True Cutting Surface Speed Vc,eff (m/min), and % of Nominal Diameter Speed.

Calculate spindle RPM from nominal 10 mm ball-nose diameter on a 0.08 mm finish pass and true cutting speed collapses 82%—plowing and work-hardening H13 tool steel

During 3- and 5-axis CNC finish-sculpting of hardened H13/P20 injection molds and titanium blisks with a Hemispherical Ball-Nose End Mill (Nominal Diameter D mm, Radius R = D / 2 mm), adjacent parallel CAM passes spaced by Radial Step-Over a_e (mm) leave a periodic **Scallop Ridge / Cusp Height h = (R - SQRT(R^2 - (a_e / 2)^2)) * 1,000** (um, approximated parabolically as a_e^2 / (4 * D)—doubling step-over quadruples manual mold-polishing cusp height). Simultaneously, at shallow Axial Finishing Depth of Cut a_p (mm < R on flat/gentle surfaces), the flutes cut NOT at nominal diameter D, but at tiny **Chordal Effective Cutting Diameter Deff = 2 * SQRT(a_p * (D - a_p)) (mm)—slashing True Surface Cutting Speed Vc,eff = (PI() * Deff * RPM) / 1,000** (m/min) to dead-zero right at the tool pole (tilting 10°–15° lead/tilt angle in 5-axis CAM escapes the zero-speed dead center).

Verify on a 10.0 mm (R = 5.0 mm) TiAlN Carbide Ball-Nose Finishing Pass—Nominal_Ball_Diameter D = 10.0 mm (B2), Radial_Stepover a_e = 0.45 mm (B3), Axial_Finish_Stock a_p = 0.35 mm (B4), and High-Speed_Spindle N = 18,000 RPM (B5): Scallop Cusp Height h equals a mirror-ready 5.07 um (E2), Effective Cutting Diameter Deff shrinks to 3.676 mm (E3), True Surface Speed Vc,eff equals 207.9 m/min (E4—only 36.8% of the 565.5 m/min nominal speed in E5).

CNC Ball-Nose Finishing KPI (D=10.0 mm Ball, N=18,000 RPM)FormulaVerified Output
Scallop Cusp Height h (um)((D/2) - SQRT((D/2)^2 - (ae_mm/2)^2)) * 10005.07 um fine (64.41 um rough @ ae=1.6 mm)
Effective Cutting Diameter Deff (mm)2 * SQRT(Axial_ap_mm * (Ball_D_mm - ap_mm))3.676 mm (1.782 mm @ ap=0.08 mm skim)
True Surface Speed Vc,eff (m/min)(PI() * Effective_Deff_mm * RPM) / 1000207.9 m/min (100.8 m/min carbide rubbing)
% of Nominal Diameter Speed (%)(Effective_Deff_mm / Nominal_D_mm) * 10036.8% (17.8% at 0.08 mm skim)

Exact Circular-Arc Scallop Cusp Height & Chordal Effective Diameter Formula

Validate Ball_Diameter D in [0.5, 50] mm, Radial_Stepover a_e in (0, D), hemispherical Axial_DOC a_p in (0, D / 2], and Spindle_RPM in [500, 80,000].

=LET(db_m, B2, ae_m, B3, ap_m, B4, nr_p, B5, de_f, 2 * SQRT(ap_m * (db_m - ap_m)), IF(OR(db_m < 0.5, db_m > 50, ae_m <= 0, ae_m >= db_m, ap_m <= 0, ap_m > 0.5 * db_m, nr_p < 500, nr_p > 80000), "Invalid Ball-Nose Input", ROUND((de_f / db_m) * 100, 1)))

Coarse Semi-Finish Stepover (a_e = 1.6 mm) + Ultra-Shallow Skim (a_p = 0.08 mm) Rubbing Check

Open stepover to B3 = 1.60 mm while taking a tiny B4 = 0.08 mm spring pass: Scallop Height E2 explodes 12.7x to 64.41 um, while Deff E3 shrinks to 1.782 mm—dragging True Cutting Speed E4 down to 100.8 m/min (17.8% of nominal in E5) and chipping the chisel-edge tip.

=IF(ISTEXT(E5), E5, ROUND(((B2 / 2) - SQRT(((B2 / 2) ^ 2) - ((B3 / 2) ^ 2))) * 1000, 2))

Try the example

Use the original values or change them to test your understanding.

Further reading