Arte SheetsLearn. Try. Understand.

RF & Microwave PCB Design, Coplanar Waveguide (CPW) Elliptic Impedance & Delay

Coplanar Waveguide (CPW) RF PCB Impedance Z0 Formula

Calculate CPW Elliptic Modulus k0 = w/(w + 2g), Half-Space Effective Permittivity (1 + eps_r)/2, Hilberg Characteristic Impedance Z0 (Ohms), and Phase Velocity (mm/ns).

On an unbacked Coplanar Waveguide, Z0 depends ONLY on trace-to-gap aspect ratio w/(w+2g)—independent of substrate thickness

Unlike microstrip (whose 50-Ohm trace width scales linearly with dielectric core height h), an unbacked Coplanar Waveguide (CPW) places coplanar top-layer ground planes on BOTH sides of Center Conductor Width w (mm) separated by Symmetric Coplanar Air/Mask Slot Gaps g (mm) atop thick Relative Permittivity epsilon_r. Conformal Schwarz-Christoffel mapping (Wen / Hilberg closed-form elliptic integral ratio for 0 < k_0 <= 0.707) shows half the electric flux travels in air (epsilon = 1) and half inside the thick dielectric (epsilon_r), locking Effective Permittivity epsiloneff = (1 + epsilon_r) / 2, **Elliptic Aspect Modulus k_0 = w / (w + 2 * g) (k’_0 = SQRT(1 - k_0^2)), Elliptic Ratio K(k_0) / K(k’_0) = PI() / LN(2 * (1 + SQRT(k’_0)) / (1 - SQRT(k’_0))), Characteristic Impedance Z_0 = (30 * PI()) / (SQRT(epsiloneff) * (K / K’)) (Ohms), and Quasi-TEM Phase Velocity v_p = 299.792458 / SQRT(epsiloneff)** (mm/ns).

Verify on an FR-4 / Rogers Hybrid 2.4 GHz RF Front-End Launch—Center_Strip_Width w = 1.05 mm (B2), Symmetric_Side_Gap g = 0.23 mm (B3 -> Elliptic Modulus k_0 = 0.6954 in E2), and Substrate_Permittivity epsilon_r = 4.35 (B4): Effective Permittivity equals 2.675 (E3), CPW Impedance hits 58.50 Ohms (E4), and Phase Velocity runs at 183.30 mm/ns (E5).

Unbacked CPW RF Transmission-Line KPI (w=1.05 mm, g=0.23 vs 0.48 mm, eps_r=4.35)FormulaVerified Output
Elliptic Modulus k0Width_w_mm / (Width_w_mm + 2 * Gap_g_mm)0.6954 (0.5224 @ wide gap g=0.48 mm)
Effective Permittivity eps_eff(1 + Substrate_Permittivity_eps_r) / 22.675
CPW Characteristic Impedance Z0(30 * PI()) / (SQRT(eps_eff) * (K/Kp))58.50 Ohms (71.84 Ohms @ g=0.48 mm)
Quasi-TEM Phase Velocity (mm/ns)299.792458 / SQRT(eps_eff)183.30 mm/ns (5.46 ps/mm delay)

Hilberg Conformal-Elliptic CPW Impedance & Phase Velocity Formula (0 < k0 <= 0.707)

Validate Strip_Width w > 0.05 mm, Side_Gap g > 0.05 mm, Hilberg lower-branch regime w / (w + 2 * g) <= 0.707, and Substrate_eps_r in [1.0, 25.0]. Try writing the nested SQRT(1 - k_0^2) elliptic ratio yourself first; if your parentheses mismatch inside LN(...), ask the in-app AI assistant for a step-by-step LET decomposition hint.

=LET(wt_m, B2, gp_m, B3, er_s, B4, kz_m, wt_m / (wt_m + 2 * gp_m), ef_p, (1 + er_s) / 2, IF(OR(wt_m <= 0.05, gp_m <= 0.05, kz_m > 0.707, er_s < 1, er_s > 25), "Invalid CPW Geometry", ROUND(299.792458 / SQRT(ef_p), 2)))

Over-Etched 0.48 mm Coplanar Ground Gap Impedance Mismatch Check (Set Gap g B3 = 0.48 mm)

Widen the coplanar ground-plane clearance gap from 0.23 to 0.48 mm (B3 = 0.48): Elliptic Modulus E2 drops to 0.5224 and CPW Impedance E4 jumps from 58.50 to 71.84 Ohms—causing an immediate return-loss reflection spike on a 50-Ohm VNA port.

=IF(ISTEXT(E5), E5, LET(kz_m, B2 / (B2 + 2 * B3), kp_m, SQRT(1 - (kz_m ^ 2)), kk_r, PI() / LN((2 * (1 + SQRT(kp_m))) / (1 - SQRT(kp_m))), ef_p, (1 + B4) / 2, ROUND((30 * PI()) / (SQRT(ef_p) * kk_r), 2)))

Try the example

Use the original values or change them to test your understanding.

Further reading