Arte SheetsLearn. Try. Understand.

OSHA 1910.178 Powered Industrial Trucks, Forklift Attachment Derating & Warehouse Safety

Load Moment: Why a Forklift’s Load Centre Matters

Explore the arithmetic of a force and lever arm, and find the manufacturer-rated capacity for a specific forklift and attachment.

A physical illustration, not a capacity rating

A load farther from a pivot produces a larger moment when its force stays the same. In a simplified static example, moment equals force multiplied by perpendicular distance from the chosen pivot. Treating a 500 kg object as having weight 500 × 9.80665 N, at a 1.0 m arm its moment is approximately 4.903 kN·m; at a 2.0 m arm the same force gives approximately 9.807 kN·m.

These are hypothetical moments about an assumed pivot, not the rated capacity, tipping limit or safe payload of any truck. The nameplate load-centre distance is measured from the specified load reference face, which is not generally the same as the distance from the axle used in an actual moment calculation.

Hypothetical massAssumed perpendicular armIllustrative weight moment
500 kg1.0 m4.903 kN·m
500 kg2.0 m9.807 kN·m

Nominal weight moment

Enter a positive mass in kilograms and a nonnegative perpendicular distance in metres. The example uses standard gravity, 9.80665 m/s², converts newtons to kilonewtons, and multiplies by the arm. It does not account for vehicle stability, operating conditions, hydraulic limits, lift height or attachment effects.

=IF(COUNT(B2:B3)<>2,"Enter numeric inputs",IF(OR(B2<=0,B3<0),"Check example inputs",ROUND(B2*9.80665*B3/1000,3)))

Use the truck and attachment rating

For a real lift, use the legible manufacturer’s data plate and operating instructions for the specific truck, attachment, load centre and lift height. Loads with an offset centre of gravity, unusual dimensions or uneven weight distribution require particular attention. Do not use this arithmetic to choose a payload or authorize a lift; consult the manufacturer when the applicable rating is not clear.

Attachments can change truck capacity and handling. OSHA requires applicable approvals and updated markings when modifications affect capacity or safe operation. Operators must be trained on the equipment and follow the site’s applicable procedures; dynamic movement, slopes, turns, mast tilt and other conditions also affect stability.

Try the example

Use the original values or change them to test your understanding.

Further reading