Dairy & Food Process Engineering, FDA PMO HTST Pasteurization & Sanitary Fluid Flow
HTST Pasteurization Holding-Tube Fastest-Particle Formula
Calculate Sanitary Holding-Tube Mean Bulk Velocity (m/s), Reynolds Number Re, Laminar (2.0x) vs Turbulent (1.22x) Fastest-Particle Residence Time (s), and FDA PMO 15-Second Legal Compliance.
Switch an HTST pasteurizer from turbulent fluid milk to viscous ice-cream mix at the same pump rate and centerline velocity jumps to 2x—cutting legal hold time below 15 seconds
Under the FDA Grade "A" Pasteurized Milk Ordinance (PMO), continuous High-Temperature Short-Time (HTST, >= 72 °C for >= 15.0 seconds) holding tubes are NOT regulated on Mean Plug-Flow Residence Time t_avg = L / v_avg—every single droplet, including the FASTEST centerline streamline v_max, must remain inside the upward-sloping sanitary tube for at least 15.0 seconds. In fully turbulent pipe flow (Re = rho * v_avg * D / mu >= 4,000, typical of fluid whole/skim milk at 72 °C), radial eddy mixing flattens the velocity profile to v_max ≈ 1.22 * v_avg; if high viscosity (mu, e.g. heavy cream, eggnog, or ice-cream mix) drops Reynolds number into laminar Hagen-Poiseuille flow (Re < 2,100), the centerline paraboloid accelerates to v_max = 2.00 * v_avg—slashing Fastest-Particle Hold Time t_min = L / v_max by nearly 39% at identical volumetric pump L/hr.
Verify on a 5,400 L/h Sanitary Dairy HTST Holding Tube—Product_Flow Q = 5,400.0 L/h (B2), Sanitary_Tube_ID D = 47.5 mm (2" OD x 1.65 mm wall, B3), Holding_Tube_Length L = 18.50 m (B4), Milk_Density rho = 1,028.0 kg/m³ (B5), and Milk_Viscosity_at_72C mu = 1.45 mPa·s (B6): Mean Bulk Velocity equals 0.846 m/s (E2), Reynolds Number hits turbulent 28,506 (E3), Fastest-Particle Residence Time (v_max = 1.22 * v_avg) equals 17.91 seconds (E4), and Regulatory Gate confirms "PMO >= 15s LEGAL PASS" (E5).
| FDA PMO HTST Holding-Tube KPI (5,400 L/h, ID=47.5 mm, L=18.5 m, mu=1.45 mPa·s) | Formula | Verified Output |
|---|---|---|
| Mean Bulk Velocity v_avg (m/s) | (Q_L_hr / 3600000) / ((PI()/4)*(ID_m^2)) | 0.846 m/s |
| Holding-Tube Reynolds Number Re | (rho * v_avg * ID_m) / (mu_mPa_s / 1000) | 28,506 (1,181 laminar @ 35 mPa·s mix) |
| Fastest-Particle Hold Time (sec) | Length_m / (IF(Re<2100, 2.0, 1.22)*v_avg) | 17.91 s (10.93 s ILLEGAL @ 35 mPa·s) |
| FDA PMO >= 15.0 s Legal Audit | Fastest_Hold_sec >= 15.0 | PMO >= 15s LEGAL PASS |
Hagen-Poiseuille Laminar vs Turbulent HTST Fastest-Particle Hold Time Formula
Validate Product_Flow > 0 L/h, Tube_ID > 5 mm, Tube_Length > 0 m, Density > 500 kg/m³, and Viscosity > 0 mPa·s (cP). Put the explicit input guard on E2 and propagate ISTEXT(E2) across E3..E4 so text audit labels in E5 stay decoupled from numeric upstream cells.
=LET(qf_l, B2, id_m, B3, ln_m, B4, rh_k, B5, mu_c, B6, IF(OR(qf_l <= 0, id_m <= 5, ln_m <= 0, rh_k <= 500, mu_c <= 0), "Invalid HTST Input", LET(dm_t, id_m / 1000, ar_t, (PI() / 4) * (dm_t ^ 2), va_s, (qf_l / 3600000) / ar_t, re_n, (rh_k * va_s * dm_t) / (mu_c / 1000), vm_x, IF(re_n < 2100, 2 * va_s, 1.22 * va_s), tm_s, ln_m / vm_x, IF(tm_s >= 15, "PMO >= 15s LEGAL PASS", "ILLEGAL UNDER-HOLD (<15s)"))))Viscous Ice-Cream / Eggnog Mix Laminar Transition Trap Check (Set Viscosity mu = 35.0 mPa·s)
Pump viscous 35.0 mPa·s mix (B6 = 35) at the exact same 5,400 L/h positive-displacement timing-pump speed: Mean Velocity E2 stays 0.846 m/s, yet Reynolds Number E3 plunges from 28,506 into laminar 1,181, doubling centerline peak velocity (2.0 * v_avg) so Fastest-Particle Hold Time E4 collapses from 17.91 s down to 10.93 s ("ILLEGAL UNDER-HOLD (<15s)" in E5, requiring timing-pump slowdown or longer holding loop).
=IF(ISTEXT(E2), E2, LET(dm_t, B3 / 1000, ar_t, (PI() / 4) * (dm_t ^ 2), va_s, (B2 / 3600000) / ar_t, re_n, (B5 * va_s * dm_t) / (B6 / 1000), vm_x, IF(re_n < 2100, 2 * va_s, 1.22 * va_s), ROUND(B4 / vm_x, 2)))Try the example
Use the original values or change them to test your understanding.