Arte SheetsLearn. Try. Understand.

Nanomaterials, HEPA Filtration & Tissue Scaffolds, Taylor-Cone Electrospinning

Electrospinning Taylor-Cone Critical Voltage & GSM Formula

Calculate G. I. Taylor Critical Cone-Jet Onset Voltage Vc (kV), Mean Inter-Electrode Field Vc/H (kV/cm), Dry Nanofiber Production Rate (g/h), and Nonwoven Mat GSM (g/m²).

Why neat aqueous PEO/PVA solutions spark corona discharges before spinning—until surfactant cuts 72 dyn/cm surface tension below the Taylor threshold

Electrospinning charges a polymer solution meniscus (Surface Tension gamma dyn/cm = mN/m, Solids Concentration C g/mL) pumped at Q (mL/h) through a metallic Spinneret Needle of Outer Radius R (cm) and Protrusion Length L (cm) spaced H (cm) from a grounded collector drum. Below a sharp electrostatic threshold, surface tension holds a rounded droplet; at **Sir Geoffrey Ingram Taylor’s (1969) Critical Voltage V_c = SQRT(((4 * H^2) / L^2) * (LN((2 * L) / R) - 1.5) * (0.117 * PI() * R * gamma)) (kV), Maxwell electrostatic traction snaps the meniscus into the 49.3° half-angle Taylor Cone, launching a whipping polymer jet that flashes off solvent into 100–400 nm nanofibers at Dry Fiber Mass Rate dot_mdry = Q * C (g/h) and Roll-to-Roll Nonwoven Basis Weight GSM = dot_mdry / dot_Aweb** (g/m²).

Verify on a 21-Gauge (R = 0.041 cm) PVDF / DMF Battery-Separator Electrospinner—Tip-to-Collector_Gap H = 15.0 cm (B2), Needle_Length L = 2.50 cm (B3), Outer_Radius R = 0.041 cm (B4), Solution_Surface_Tension gamma = 38.0 dyn/cm (B5), Syringe_Flow Q = 1.80 mL/h (B6), Polymer_Solids C = 0.120 g/mL (B7), and Substrate_Web_Rate dot_A = 0.24 m²/h (B8): Taylor Critical Voltage V_c equals 16.51 kV (E2 = 1.100 kV/cm average field in E3), Dry Nanofiber Output equals 0.216 g/h (E4), depositing a 0.90 g/m² (GSM) nanofiber veil (E5).

Taylor (1969) Electrospinning KPI (H=15 cm, L=2.5 cm, R=0.041 cm, gamma=38 vs 72 dyn/cm)FormulaVerified Output
Taylor Critical Voltage Vc (kV)SQRT((4*H^2/L^2)*(LN(2*L/R)-1.5)*(0.117*PI()*R*gam))16.51 kV (22.72 kV corona risk @ 72 dyn/cm)
Mean Onset Field Vc / H (kV/cm)Critical_Voltage_Vc_kV / Gap_H_cm1.100 kV/cm (1.515 kV/cm @ neat water)
Dry Nanofiber Mass Rate (g/h)Syringe_Flow_mL_h * Polymer_Conc_g_mL0.216 g/h / nozzle
Nanofiber Veil Basis Wt (g/m²)Dry_Nanofiber_g_h / Web_Area_Rate_m2_h0.90 g/m² (HEPA slip-flow veil)

G. I. Taylor (1969) Electrostatic Meniscus Instability & Nanofiber Web Formula

Validate Gap H > L >= 0.3 cm, slender needle 2 * L / R > EXP(1.8) (LN(2*L/R) > 1.8), Surface_Tension gamma in [10, 90] dyn/cm, Flow Q > 0 mL/h, Concentration C in (0.005, 0.60] g/mL, and Web_Area > 0 m²/h.

=LET(hg_c, B2, ln_c, B3, rn_c, B4, gm_d, B5, qf_m, B6, cp_g, B7, aw_m, B8, lg_t, LN((2 * ln_c) / rn_c) - 1.5, IF(OR(ln_c < 0.3, hg_c <= ln_c, rn_c <= 0.003, lg_t <= 0.3, gm_d < 10, gm_d > 90, qf_m <= 0, cp_g <= 0.005, cp_g > 0.6, aw_m <= 0), "Invalid Electrospin Input", ROUND((qf_m * cp_g) / aw_m, 2)))

Un-Surfactanted Neat Water Solvent (gamma = 72 dyn/cm) Corona Breakdown Check (Set B5 = 72 dyn/cm)

Switch from organic DMF (38 dyn/cm) to pure water (gamma B5 = 72 dyn/cm) for green PVA spinning without non-ionic Triton/Tween surfactant: Taylor Onset Voltage E2 jumps to 22.72 kV (1.515 kV/cm in E3)—approaching needle-tip air ionization where corona discharges sputter beads instead of stable nanofibers.

=IF(ISTEXT(E5), E5, ROUND(SQRT(((4 * (B2 ^ 2)) / (B3 ^ 2)) * (LN((2 * B3) / B4) - 1.5) * (0.117 * PI() * B4 * B5)), 2))

Try the example

Use the original values or change them to test your understanding.

Further reading