Automated Packaging, CNC Tool Changers & Rotary Turrets, External Geneva Mechanism
External Geneva Wheel Dwell, Velocity & Accel Formula
Calculate Dwell-to-Index Motion Ratio, Mid-Stroke Peak Wheel Angular Velocity (rad/s), Crank Angle at Peak Acceleration (deg), and Peak Angular Acceleration (rad/s²).
Dropping a rotary turret from a 4-slot to a 3-slot Geneva wheel for longer dwell multiplies peak angular acceleration 5.8-fold—shearing cam-follower pins at 90 RPM
An External N-Slot Geneva (Maltese Cross) Intermittent Indexing Mechanism (Slots N >= 3, tangent slot entry so impact velocity is zero at beta_0 = 90° - (180° / N), Center-to-Crank Ratio k = 1 / sin(pi / N)) converts continuous Driver Crank Rotation N_c (RPM -> omega_c = 2 * pi * N_c / 60 rad/s) into 360° / N turret steps separated by locked crescent dwell. Each crank revolution spends (180° - 360° / N) indexing and (180° + 360° / N) locked stationary, fixing Dwell-to-Motion Ratio (N + 2) / (N - 2) (3.00 for 4-slot; 5.00 for 3-slot) and Mid-Index (beta = 0°) Peak Angular Velocity omegaw,max = omega_c / (k - 1) (rad/s). Differentiating omega_w(beta) locates **Peak Angular Acceleration right at cos(beta_p) = (-(1 + k^2) + sqrt((1 + k^2)^2 + 32 * k^2)) / (4 * k) (beta_p = 11.46° on a 4-slot wheel) where alphamax = (omega_c^2) * (k * sin(beta_p) * (k^2 - 1)) / ((1 + k^2 - 2 * k * cos(beta_p))^2)** (rad/s²).
Verify on a 4-Station Bottling Starwheel / CNC ATC Geneva Turret—Slot_Count N = 4 (B2) and Driver_Crank_Speed N_c = 90.0 RPM (omega_c = 9.425 rad/s, B3): Dwell-to-Motion Ratio equals 3.00 (270° dwell / 90° index. E2), Peak Driven-Wheel Velocity equals 22.75 rad/s (E3), Peak Acceleration occurs at Crank Angle 11.46° before/after centerline (E4), reaching 480.3 rad/s² (= 5.409 * omega_c^2. E5).
| External Geneva Indexing Kinematics KPI (Driver Crank Nc=90 RPM, wc=9.425 rad/s) | Formula | Verified Output |
|---|---|---|
| Dwell-to-Motion Ratio | (Slot_Count_N + 2) / (Slot_Count_N - 2) | 3.00 @ 4-slot (5.00 @ 3-slot) |
| Peak Wheel Velocity w_max (rad/s) | wc_rad_s / ((1 / SIN(PI()/N)) - 1) | 22.75 rad/s (60.92 rad/s @ 3-slot) |
| Crank Angle @ Peak Accel (deg) | DEGREES(ACOS((-(1+k^2) + SQRT((1+k^2)^2 + 32*k^2)) / (4*k))) | 11.46° @ 4-slot (4.76° @ 3-slot) |
| Peak Wheel Accel a_max (rad/s²) | wc^2 * k * sin(bp) * (k^2 - 1) / (1 + k^2 - 2*k*cos(bp))^2 | 480.3 rad/s² (2,788.5 = 5.8x SHOCK) |
Exact External Geneva Mechanism Dwell, Velocity & Peak Acceleration Formula
Validate integer-station Slot_Count N in [3, 24] and Driver_Crank_Speed N_c in [1, 1,200] RPM.
=LET(ns_g, B2, nc_r, B3, wc_r, (2 * PI() * nc_r) / 60, kr_g, 1 / SIN(PI() / ns_g), cb_p, (-(1 + (kr_g ^ 2)) + SQRT(((1 + (kr_g ^ 2)) ^ 2) + 32 * (kr_g ^ 2))) / (4 * kr_g), sb_p, SQRT(1 - (cb_p ^ 2)), am_x, (wc_r ^ 2) * (kr_g * sb_p * ((kr_g ^ 2) - 1)) / (((1 + (kr_g ^ 2) - 2 * kr_g * cb_p) ^ 2)), IF(OR(ns_g < 3, ns_g > 24, nc_r < 1, nc_r > 1200), "Invalid Geneva Input", ROUND(am_x, 1)))3-Slot Geneva Substitution (N = 3 at 90 RPM) 5.8x Inertial Cam-Pin Shear Check
Drop station count to B2 = 3 (120° turret index squeezed into just 60° of crank rotation -> 5.00 dwell ratio in E2): Peak Wheel Speed E3 jumps 2.68x to 60.92 rad/s while Peak Angular Acceleration E5 explodes 5.81-fold from 480.3 to 2,788.5 rad/s² at 4.76° crank angle (E4)—explaining why high-speed dial tables use >= 6 Geneva slots or conjugate globoidal cams.
=IF(ISTEXT(E5), E5, LET(wc_r, (2 * PI() * B3) / 60, kr_g, 1 / SIN(PI() / B2), ROUND(wc_r / (kr_g - 1), 2)))Try the example
Use the original values or change them to test your understanding.