Arte SheetsLearn. Try. Understand.

Power-Electronics Thermal Management, Extended-Surface Fin Efficiency & Heat Transfer

Extruded Heatsink Fin Efficiency TANH(mL)/(mL) Formula

Calculate Dimensionless Fin Parameter m*L, Single-Fin Efficiency eta_f = TANH(mL)/(mL) (%), Overall Finned-Array Thermal Resistance R_sa (°C/W), and Heatsink Base Temperature Ts (°C).

Making heatsink fins taller yields diminishing returns—conduction temperature drop toward the fin tip follows TANH(mL) / (mL)

Treating every square centimeter of a tall, thin aluminum heatsink fin as isothermal at Base Temperature T_s under-predicts IGBT/MOSFET operating temperatures. Along a thin rectangular fin of length L (m), thickness t (m), thermal conductivity k (~205 W/(m·K) for 6063-T5 aluminum), and convection coefficient h (W/(m²·K)), axial conduction competes against two-sided surface convection via Dimensionless Fin Parameter m * L = SQRT((2 * h) / (k * t)) * L. Adiabatic-tip differential conduction yields Single-Fin Efficiency eta_f = TANH(m*L) / (m*L) (expressed universally with EXP as ((EXP(2*mL) - 1) / (EXP(2*mL) + 1)) / mL), Overall Finned-Surface Efficiency eta_o = 1 - (A_fin / (A_fin + A_base)) * (1 - eta_f), Sink-to-Ambient Thermal Resistance R_sa = 1 / (eta_o * h * (A_fin + A_base)) (°C/W), and Baseplate Temperature T_s = T_amb + Q * R_sa (°C).

Verify on a Forced-Air 6063-T5 Inverter Heatsink—Fin_Height L = 32.0 mm (B2), Fin_Thickness t = 1.80 mm (B3), Forced_Air_Convection h = 38.0 W/(m²·K) (B4), Aluminum_Conductivity k = 205.0 W/(m·K) (B5 -> m*L = 0.4592 in E2 & Single-Fin Efficiency eta_f = 93.52% in E3), Total_Finned_Area A_f = 0.085 m² (B6), Unfinned_Root_Area A_b = 0.015 m² (B7), Power_Dissipation Q = 45.0 W (B8), and Ambient_Air T_a = 35.0 °C (B9): Sink-to-Ambient Resistance R_sa equals 0.279 °C/W (E4) and Heatsink Base Temperature settles at 47.53 °C (E5).

Extended-Surface Heatsink KPI (L=32 mm, t=1.8 mm, h=38 W/m²K, Af=0.085 m², Q=45 W)FormulaVerified Output
Dimensionless Fin Parameter m*LSQRT((2 * h) / (k * (t_mm/1000))) * (L_mm/1000)0.4592 (0.2235 @ fan-fail h=9)
Single-Fin Efficiency eta_f (%)(TANH(mL) / mL) * 10093.52% (98.37% @ fan-fail h=9)
Sink-to-Ambient Resistance Rsa1 / (eta_o * h * (Af_m2 + Ab_m2))0.279 °C/W (1.127 °C/W @ fan-fail)
Heatsink Baseplate Temp Ts (°C)Ambient_Ta_C + Power_W * Rsa_C_W47.53 °C (85.70 °C @ cooling-fan fail)

Hyperbolic-Tangent Fin Efficiency & Overall Heatsink Thermal Resistance Formula

Validate Fin_Length L > 0 mm, Fin_Thick t > 0 mm, Convection h > 0 W/(m²·K), Conductivity k > 1 W/(m·K), Fin_Area > 0 m², Base_Area >= 0 m², and Power >= 0 W. Expressing TANH(x) via (EXP(2*x) - 1) / (EXP(2*x) + 1) guarantees identical evaluation across every spreadsheet engine. In a cloud collaboration thermal budget, teammates using the in-app Pro Assistant (metered monthly Arte AI credits) or testing the Arte Sheets ChatGPT 0.1.0 connector (In review / Not published; read_range inspects up to 200 cells of raw formulas and revision without consuming Arte AI credits) can audit fan-failure derating margins side by side.

=LET(ln_m, B2 / 1000, th_m, B3 / 1000, hc_w, B4, kc_w, B5, af_m, B6, ab_m, B7, pw_w, B8, ta_c, B9, IF(OR(ln_m <= 0, th_m <= 0, hc_w <= 0, kc_w <= 1, af_m <= 0, ab_m < 0, pw_w < 0), "Invalid Heatsink Input", LET(ml_p, SQRT((2 * hc_w) / (kc_w * th_m)) * ln_m, th_v, (EXP(2 * ml_p) - 1) / (EXP(2 * ml_p) + 1), ef_f, th_v / ml_p, at_m, af_m + ab_m, eo_f, 1 - (af_m / at_m) * (1 - ef_f), rs_a, 1 / (eo_f * hc_w * at_m), ROUND(ta_c + pw_w * rs_a, 2))))

Cooling-Fan Failure Natural-Convection Fallback Check (Set Convection h B4 = 9.0 W/(m²·K))

Lose the axial cooling fan so h B4 drops from 38.0 down to natural convection 9.0 W/(m²·K): although Fin Efficiency E3 rises to 98.37% (m*L = 0.2235 in E2), Sink Thermal Resistance R_sa E4 quadruples from 0.279 to 1.127 °C/W, driving Heatsink Base Temperature E5 from 47.53 °C up to 85.70 °C.

=IF(ISTEXT(E5), E5, LET(ml_p, SQRT((2 * B4) / (B5 * (B3 / 1000))) * (B2 / 1000), ef_f, ((EXP(2 * ml_p) - 1) / (EXP(2 * ml_p) + 1)) / ml_p, at_m, B6 + B7, eo_f, 1 - (B6 / at_m) * (1 - ef_f), ROUND(1 / (eo_f * B4 * at_m), 3)))

Try the example

Use the original values or change them to test your understanding.

Further reading