Glass Manufacturing & Regenerative Tank Thermodynamics, Batch Fusion Loss & Cullet Rule
Glass Furnace Carbonate Fusion Loss, Cullet & Fuel Formula
Calculate Fused Virgin-Batch Glass Tonnage (t/d), Total Regenerative Furnace Pull (t/d), Cullet Share in Molten Pull (%), and Cullet-Reduced Specific Melting Energy (GJ/t).
Every tonne of virgin soda-ash + limestone glass batch vents 162 kg of CO2 up the stack—whereas recycled cullet melts at 100% yield and cuts furnace fuel 2.5% per 10% cullet
Feeding Mbatch (t/d) of virgin Soda-Lime-Silica Raw Mineral Batch (~60% quartz sand SiO_2 + ~19% soda ash Na_2CO_3 + ~18% limestone/dolomite CaCO_3·MgCO_3 + saltcake fining agent) into a 1,580°C cross-fired regenerative tank yields ONLY **Mfused = Mbatch * (1 - Lign / 100) (t/d of molten glass, where Carbonate Calcination / Fusion Loss Lign ~= 15%–17% escapes as process CO2 gas). By contrast, crushed Recycled Glass Cullet Mcullet (t/d) already underwent endothermic silicate reaction—contributing 100% of its mass to Total Tin-Bath / Forehearth Pull Ptot = Mfused + Mcullet (t/d) at Finished-Glass Cullet Ratio Cpull = (Mcullet / Ptot) * 100%, and trimming Zero-Cullet Specific Melting Fuel E_0 (GJ/t) via the industry 2.5%-per-10%-Cullet Rule Espec = E_0 * (1 - 0.0025 * Cpull)** (GJ/t).
Verify on a 532 t/d Architectural Float-Glass Tank—Virgin_Mineral_Batch Mbatch = 420 t/d (B2), Carbonate_Fusion_Loss Lign = 16.2% (B3), Recycled_Cullet_Feed Mcullet = 180 t/d (B4), and Zero-Cullet_Baseline_Fuel E_0 = 6.40 GJ/t (B5): Fused Batch Glass equals 351.96 t/d (68.04 t/d calcination CO2 vented. E2), Total Molten Glass Pull equals 531.96 t/d (E3), Cullet Fraction in Melted Glass equals 33.84% (E4, higher than the raw 30.0% belt-weight ratio), and Specific Tank Fuel drops to 5.859 GJ/t (E5).
| Glass Tank Mass & Energy KPI (L_ign=16.2%, Zero-Cullet Fuel E0=6.40 GJ/t) | Formula | Verified Output |
|---|---|---|
| Fused Virgin-Batch Glass (t/d) | Raw_Batch_t_d * (1 - Fusion_Loss_Pct / 100) | 351.96 t/d (150.84 t/d high-cullet campaign) |
| Total Molten Furnace Pull (t/d) | Fused_Batch_Glass_t_d + Cullet_Feed_t_d | 531.96 t/d (530.84 t/d constant pull) |
| Cullet Share in Molten Pull (%) | (Cullet_Feed_t_d / Total_Pull_t_d) * 100 | 33.84% (71.58% container/eco-float) |
| Specific Melting Fuel (GJ/t) | Zero_Cullet_GJ_t * (1 - 0.0025 * Cullet_Pct) | 5.859 GJ/t (5.255 GJ/t = -17.9% fuel) |
Soda-Lime-Silica Carbonate Fusion Balance & 0.25%/Pct Cullet Energy Formula
Validate Raw_Batch >= 0 t/d, Fusion_Loss in [8, 25]%, Cullet_Feed >= 0 t/d (with Raw_Batch + Cullet_Feed >= 10 t/d), and Baseline_Fuel E_0 in [3.5, 12.0] GJ/t.
=LET(rb_t, B2, ls_p, B3, cl_t, B4, zf_g, B5, fb_t, rb_t * (1 - ls_p / 100), pl_t, fb_t + cl_t, cs_p, (cl_t / pl_t) * 100, IF(OR(rb_t < 0, ls_p < 8, ls_p > 25, cl_t < 0, rb_t + cl_t < 10, zf_g < 3.5, zf_g > 12), "Invalid Glass Input", ROUND(zf_g * (1 - 0.0025 * cs_p), 3)))High-Cullet Decarbonization Campaign (180 t/d Batch + 380 t/d Cullet) Check
Install optical color-sorting to boost cullet to B4 = 380 t/d while cutting virgin mineral batch to B2 = 180 t/d at the same 530.84 t/d pull (E3): Cullet Share in Molten Pull E4 climbs to 71.58%, slashing Specific Natural-Gas/Oxy-Fuel Demand E5 to 5.255 GJ/t while eliminating 38.9 t/d of raw carbonate process CO2.
=IF(ISTEXT(E5), E5, LET(pl_t, B2 * (1 - B3 / 100) + B4, ROUND((B4 / pl_t) * 100, 2)))Try the example
Use the original values or change them to test your understanding.