Pulp, Paper & Packaging Process Engineering, Fourdrinier Wet-End & Dryer Section Balance
Paper Machine Wet-End Dewatering & Steam Drying Formula
Calculate Bone-Dry Fiber Throughput (t/h), Headbox Slurry Flow (t/h), Dryer-Section Water Evaporation Rate (t/h), and Steam Boiler Demand (t/h) across Press-Felt Solids.
Why losing 6% press-section solids from 44% down to 38% hikes paper-machine dryer-section steam consumption by 30%
On a high-speed Fourdrinier or Yankee Paper Machine, 99.35% water Headbox Stock (Consistency Chb = 0.65% bone-dry fiber) jets onto the forming wire (~20% solids at couch roll), squeezes mechanically through shoe presses (Press Exit Solids S_p = 44%), and evaporates the remaining bound moisture over steam-heated cast-iron dryer cans to Pope-Reel Finished Solids S_r = 94% (6% equilibrium moisture) at Reel Production Rate Preel (t/h as-rolled). Because thermal evaporation costs ~10x more energy per tonne of water than mechanical shoe-pressing, **Dryer Water Evaporation Wevap = Preel * ((S_r / S_p) - 1) (t/h) is non-linearly sensitive to S_p: each 1% drop in press-exit dryness adds ~4%–5% to Dryer Live-Steam Demand Msteam = Wevap * Rsteam** (t/h, where Rsteam = 1.30–1.55 t steam / t water evaporated).
Start on a 28.0 t/h Linerboard Machine—Reel_Paper_Production Preel = 28.0 t/h (B2), Reel_Dry_Solids S_r = 94.0% (B3), Shoe-Press_Exit_Solids S_p = 44.0% (B4), Headbox_Consistency Chb = 0.65% (B5), and Specific_Steam_Ratio Rsteam = 1.38 t/t (B6). An independent trap is computing evaporation as 28 * (0.94 - 0.44) = 14.0 t/h (wrong—at 44% solids, the wet sheet entering the dryers actually weighs 28 * (94 / 44) = 59.82 t/h, NOT 28 t/h). Ask the in-app assistant for a fiber-conservation mass-balance hint: Bone-Dry Fiber equals 26.32 t/h (E2), Headbox Slurry Feed equals 4,049.2 t/h (E3), True Dryer Water Evaporation equals 31.82 t/h (E4), and Live Steam Demand equals 43.91 t/h (E5).
| TAPPI Paper Machine Mass-Balance KPI (28 t/h Reel @ 94% Solids, C_hb=0.65%) | Formula | Verified Output |
|---|---|---|
| Bone-Dry Fiber Rate (t/h) | Reel_Prod_t_h * (Reel_Solids_Pct / 100) | 26.32 t/h |
| Headbox Slurry Flow (t/h) | Bone_Dry_Fiber_t_h / (Headbox_Consist_Pct / 100) | 4,049.2 t/h (~99.35% whitewater) |
| Dryer Water Evaporation (t/h) | Reel_Prod_t_h * ((Reel_Solids_Pct / Press_Pct) - 1) | 31.82 t/h (41.26 t/h @ blinded 38% felt) |
| Dryer Section Steam (t/h) | Water_Evap_t_h * Steam_To_Evap_Ratio | 43.91 t/h (+29.7% -> 56.94 t/h @ 38%) |
TAPPI TIP 0404-47 Wet-to-Dry Solids Conservation & Dryer Evaporation Formula
Validate Reel_Production Preel > 0.5 t/h, Headbox_Consistency Chb in [0.1%, 4.0%], Press_Solids S_p in [20%, 60%], Reel_Solids S_r in (S_p, 99%], and Steam_Ratio Rsteam in [1.0, 2.5] t/t.
=LET(pr_t, B2, sr_p, B3, sp_p, B4, ch_p, B5, rs_t, B6, we_t, pr_t * ((sr_p / sp_p) - 1), IF(OR(pr_t <= 0.5, ch_p < 0.1, ch_p > 4, sp_p < 20, sp_p > 60, sr_p <= sp_p, sr_p > 99, rs_t < 1, rs_t > 2.5), "Invalid Paper Machine Input", ROUND(we_t * rs_t, 2)))Blinded Press Felt Drop from 44% to 38% Solids Steam Penalty Check (Set B4 = 38%)
Let pitch/fines blind the 3rd-press felt so Press Exit Solids drops from 44% to B4 = 38%: Dryer Water Evaporation E4 surges from 31.82 to 41.26 t/h and Boiler Steam Demand E5 jumps +29.7% (43.91 -> 56.94 t/h)—often forcing machine speed back when dryer cans hit steam-header pressure limits.
=IF(ISTEXT(E5), E5, ROUND(B2 * ((B3 / B4) - 1), 2))Try the example
Use the original values or change them to test your understanding.