Arte SheetsLearn. Try. Understand.

Engineering & Fluid Mechanics

Gates-Gaudin-Schuhmann (GGS) Particle Size Formula: Power-Law Passing & P80 Interpolation

Characterize jaw/cone crusher products and fine mineral tails using the Gates-Gaudin-Schuhmann power law P(d) = 100 * MIN(1, (d / k)^m) and solve directly for 80%-passing size P80 = k * 0.8^(1/m).

Why log-log straight lines govern fine mineral breakage fragments below top size k

Developed independently by Arthur O. Gates (1915), Antoine M. Gaudin (1926), and Reinhardt Schuhmann Jr. (1940, AIME Technical Publication 1189), the Gates-Gaudin-Schuhmann (GGS) distribution models cumulative mass fraction passing sieve aperture d <= k as a pure power law: P(d) = 100 * (d / k)^m (capped at 100% for d >= k), where k (k_100) is the theoretical 100%-passing top size and m (typically 0.4–0.9 in crushing/grinding) is the log-log distribution modulus.

Inverting the GGS power law gives an exact closed-form P80 input for Bond comminution power calculations: d_80 = k * (0.80)^(1 / m). For k = 500 um and m = 0.65, cumulative passing at d = 125 um is 40.61% (rising to 63.73% at d = 250 um), and exact P80 = 500 * 0.8^(1/0.65) = 354.71 um.

Sieve Aperture d (Top Size k = 500 um, m = 0.65)GGS Cumulative Passing P(d) %Derived P80 = k * 0.8^(1/m)
Sieve d = 125 um (Quarter Top Size)40.61% Passing354.71 um
Sieve d = 250 um (Half Top Size)63.73% Passing354.71 um
Sieve d = 600 um (> Top Size k = 500 um)100.00% (Capped at MIN(1, ...))354.71 um

Gates-Gaudin-Schuhmann Cumulative Passing P(d) = 100 * MIN(1, (d / k)^m)

Evaluates GGS cumulative percent passing at sieve size d (B2) with top-size cap at 100% for d >= k (B3).

=IF(OR(B2 < 0, B3 <= 0, B4 <= 0), "Invalid GGS Size Parameters", ROUND(100 * MIN(1, (B2 / B3) ^ B4), 2))

Inverted GGS 80%-Passing Size P80 = k * 0.8^(1 / m)

Solves P(d) = 80% directly for Bond comminution size P80 in the same length units as k.

=IF(OR(B2 < 0, B3 <= 0, B4 <= 0), "Invalid GGS Size Parameters", ROUND(B3 * (0.8 ^ (1 / B4)), 2))

Try the example

Use the original values or change them to test your understanding.

Further reading