Arte SheetsLearn. Try. Understand.

Semiconductor PVD/Implant Vacuum Systems, Gifford-McMahon Capture Cryopump Sizing

Gifford-McMahon Cryopump Crossover & H2 Capacity Formula

Calculate Maximum Safe Rough-to-Cryo Crossover Pressure (mbar), 15 K Activated-Charcoal H2 Sorption Capacity (mbar·L), Hours Between Regenerations (h), and Thawed H2 Pressure (mbar).

Unlike turbopumps that exhaust gas out a foreline, a 15 K capture cryopump STORES every molecule of H2 inside—turning un-purged power-outage warmups into a 149 mbar bomb

Closed-Cycle Gifford-McMahon (G-M) Helium Capture Cryopumps (80 K first-stage radiation baffle condensing H_2O + 12–15 K second-stage epoxy-bonded coconut charcoal array cryosorbing H_2, He, and Ne) deliver oil-free 3,000+ L/s water/air pumping speeds on PVD sputter coaters and ion implanters. Three strict thermodynamic budgets govern safe operation across Chamber Volume V (L): 1) Maximum Roughing Crossover Pressure Pcross = Qcross,max / V (mbar, keeping pulsed enthalpy dump below Qcross,max mbar·L so the 15 K array stays < 20 K without dumping previously trapped H_2), 2) **Hydrogen Regeneration Interval tregen = ((CH2,stdL * 1,013.25) / QH2) / 3,600 (hours from STP Standard Liters CH2 at 1,013.25 mbar·L/std L and Process H_2 Throughput QH2 mbar·L/s), and 3) Un-Vented Warmup Pressure Pthaw = (CH2,stdL * 1,013.25) / V (mbar—exceeding 40 mbar = 4.0% Lower Explosive Limit of H_2 in air** unless diluted with dry N2 purge during regeneration).

Verify on an 8-inch (200 mm) Semiconductor PVD Chamber—Chamber_Volume V = 180 L (B2), Rated_Crossover_Impulse Qcross,max = 320 mbar·L (B3), Charcoal_H_2_Capacity CH2 = 14.0 std L (B4), and Outgassing/Process_H_2_Load QH2 = 0.18 mbar·L/s (B5): Max Safe Crossover Pressure equals 1.778 mbar (1.33 Torr, E2), Total H_2 Inventory Capacity equals 14,185.5 mbar·L (E3), Operating Time to Saturation Regen equals 21.9 hours (E4), and Closed-Valve Warmup H_2 Pressure reaches 78.8 mbar (> 40 mbar H_2 LEL -> mandatory N2 purge relief valve. E5).

G-M Capture Cryopump KPI (Q_cross=320 mbar·L, Charcoal Cap=14.0 std L = 14,185.5 mbar·L)FormulaVerified Output
Max Crossover Roughing P (mbar)Max_Crossover_mbar_L / Chamber_Volume_L1.778 mbar (3.368 mbar @ 95 L lock)
15 K H2 Sorption Capacity (mbar·L)Charcoal_H2_std_L * 1013.2514,185.5 mbar·L
Run Hours to Regeneration (h)(Sorption_mbar_L / Process_H2_mbar_Ls) / 360021.9 h (3.2 h @ reactive H2 sputter)
Un-Purged Warmup H2 Rise (mbar)Sorption_Capacity_mbar_L / Volume_V_L78.8 mbar (149.3 mbar >> 40 mbar LEL)

SEMI S2 Cryopump Crossover Enthalpy, Regeneration & Hydrogen LEL Purge Formula

Validate Chamber_Volume V in [5, 10,000] L, Crossover_Limit in [20, 2,500] mbar·L, H_2_Capacity in [1, 150] std L, and H_2_Throughput in [0.0001, 20] mbar·L/s.

=LET(vc_l, B2, xc_m, B3, ch_s, B4, qh_m, B5, IF(OR(vc_l < 5, vc_l > 10000, xc_m < 20, xc_m > 2500, ch_s < 1, ch_s > 150, qh_m < 0.0001, qh_m > 20), "Invalid Cryopump Input", ROUND((ch_s * 1013.25) / vc_l, 1)))

Reactive H2 Plasma Process (Q_H2 = 1.25 mbar·L/s) on Compact 95 L Chamber Check

Flow B5 = 1.25 mbar·L/s (~74 sccm) of H_2 into a compact B2 = 95 L PECVD/sputter chamber: Saturation Regen Interval E4 collapses to 3.2 hours (requiring automated mid-shift fast regen or switching to a turbopump), while Un-Purged Thaw Pressure E5 jumps to 149.3 mbar (3.7x above the 4% H_2 explosion threshold under SEMI S2).

=IF(ISTEXT(E5), E5, ROUND(((B4 * 1013.25) / B5) / 3600, 1))

Try the example

Use the original values or change them to test your understanding.

Further reading