Healthcare & Clinical
Goldman-Hodgkin-Katz (GHK) Membrane Voltage Equation (K+, Na+, Cl-)
Explore the GHK constant-field voltage equation and a potassium Nernst comparison at 37 °C, with explicit units and input checks.
A constant-field model of membrane voltage
The Goldman–Hodgkin–Katz (GHK) voltage equation models membrane potential from relative ion permeabilities and ion concentrations on each side. For monovalent K⁺, Na⁺ and Cl⁻, the chloride concentrations appear on opposite sides of the ratio from the positive ions. All concentrations must use the same units; permeability values must be nonnegative and on a common relative scale.
At 37 °C, RT/F is approximately 26.7267 mV when the natural logarithm is used. The example uses a constant-field, zero-net-current model; actual cells can have additional ions, pumps and time-varying properties. Changing a permeability in the equation illustrates the static model response and does not by itself simulate an action potential over time.
For the fictional parameters shown in the worksheet, the model gives −67.33 mV. Holding all other inputs fixed while raising relative Na⁺ permeability from 0.04 to 20 gives 51.13 mV in the model. For the same potassium concentrations alone, the Nernst potential is −89.06 mV.
| Illustrative model | Parameters changed | Voltage at 37 °C |
|---|---|---|
| GHK baseline | PNa = 0.04 | −67.33 mV |
| GHK second static scenario | PNa = 20 | 51.13 mV |
| Potassium Nernst | K outside 5; K inside 140 | −89.06 mV |
GHK voltage for K⁺, Na⁺ and Cl⁻
B2:B4 contain relative permeabilities; B5:B10 contain the six outside/inside ion concentrations shown in the workbook. Every input must be numeric and nonnegative, and the weighted numerator and denominator must both be positive.
=IF(COUNT(B2:B10)<>9,"Missing or nonnumeric input",IF(MIN(B2:B10)<0,"Negative input",IF(OR((B2*B5+B3*B7+B4*B10)<=0,(B2*B6+B3*B8+B4*B9)<=0),"Invalid log ratio",ROUND(26.7267*LN((B2*B5+B3*B7+B4*B10)/(B2*B6+B3*B8+B4*B9)),2))))Potassium Nernst comparison
This formula requires only B5 and B6 and rejects zero or negative potassium concentrations before taking the logarithm.
=IF(COUNT(B5,B6)<>2,"Missing or nonnumeric input",IF(OR(B5<=0,B6<=0),"Potassium concentrations must be positive",ROUND(26.7267*LN(B5/B6),2)))Try the example
Use the original values or change them to test your understanding.