Arte SheetsLearn. Try. Understand.

Mechanized Tunneling & Underground Civil Engineering, CSM / NTNU Hard-Rock TBM Performance

Hard-Rock TBM Cutterhead Thrust, Torque & Daily Advance

Calculate Total Cutterhead Normal Thrust (MN), Cutterhead Drive Torque (MN·m), Net Boring Rate of Penetration ROP (m/h), and Daily Utilization-Adjusted Tunnel Advance (m/d).

Entering 260 MPa quartzite cuts TBM disc penetration from 7.2 to 2.4 mm/rev while abrasive cutter changes slash shift utilization to 28%—collapsing advance from 32.7 to 7.3 m/day

Under the Colorado School of Mines (CSM) and NTNU Mechanized Tunneling Models, a Hard-Rock Tunnel Boring Machine (TBM) (Bore Diameter D m dressed with N_c 17-inch or 19-inch constant-cross-section disc cutters at Normal Force F_n kN/cutter and Rolling-to-Normal Drag Coefficient RC = F_r / F_n) requires **Total Propel Cylinder Thrust Thead = (N_c * F_n) / 1,000 (MN, plus shield/gripper friction) and Cutterhead Torque Mhead = (N_c * (F_n * RC) * (0.30 * D)) / 1,000 (MN·m, where reff ~= 0.30 * D is the cutter-array weighted moment arm). Yet tunnel schedules hinge on separating Instantaneous Net Boring ROP IROP = (p * RPM * 60) / 1,000 (m/h at Penetration p mm/rev) from Daily Advance Rate AR = IROP * 24 * (U / 100) (m/day), where Machine Utilization U (30%–50%)** deducts ring-build/regrip strokes, muck train swaps, probe drilling, and worn cutter-ring changes.

Verify on a 6.8 m Metro Rail Hard-Rock TBM in Gneiss—Excavation_Diameter D = 6.80 m (B2), 17-inch_Disc_Cutters N_c = 44 (B3), Normal_Thrust_per_Cutter F_n = 245 kN (B4), Rolling_Coefficient RC = 0.085 (B5), Penetration p = 7.20 mm/rev (B6), Cutterhead_Speed = 7.50 RPM (B7), and Daily_Utilization U = 42.0% (B8): Total Cutterhead Thrust equals 10.78 MN (E2), Cutterhead Torque equals 1.87 MN·m (E3), Net Boring ROP equals 3.24 m/h (E4), and Daily Tunnel Advance equals 32.7 m/day (E5).

CSM / NTNU Hard-Rock TBM KPI (D=6.8 m, 44 Cutters, 7.5 RPM)FormulaVerified Output
Total Cutterhead Thrust (MN)(Cutter_Count_N * Normal_Fn_kN) / 100010.78 MN (12.54 MN @ 285 kN max ring load)
Cutterhead Drive Torque (MN·m)(N * (Fn * RC) * (0.30 * Diam_D)) / 10001.87 MN·m (1.41 MN·m shallow glazed cut)
Instantaneous Net ROP (m/h)(Penetration_mm_rev * RPM * 60) / 10003.24 m/h (1.08 m/h in 260 MPa quartzite)
Daily Tunnel Advance (m/day)Net_ROP_m_hr * 24 * (Utilization_Pct / 100)32.7 m/d (7.3 m/d schedule stall)

CSM / NTNU Hard-Rock TBM Disc Thrust, Moment Arm & Utilization Advance Formula

Validate Bore_Diameter D in [2.5, 16.0] m, Cutter_Count N_c in [15, 110], Cutter_Normal_Load F_n in [80, 350] kN, Rolling_Drag RC in [0.03, 0.20], Penetration p in [0.5, 20.0] mm/rev, Cutterhead_RPM in [1.5, 15.0], and Utilization U in [5, 75]%.

=LET(db_m, B2, nc_i, B3, fn_k, B4, rc_f, B5, pn_m, B6, nr_p, B7, ut_p, B8, rp_h, (pn_m * nr_p * 60) / 1000, IF(OR(db_m < 2.5, db_m > 16, nc_i < 15, nc_i > 110, fn_k < 80, fn_k > 350, rc_f < 0.03, rc_f > 0.2, pn_m < 0.5, pn_m > 20, nr_p < 1.5, nr_p > 15, ut_p < 5, ut_p > 75), "Invalid TBM Input", ROUND(rp_h * 24 * (ut_p / 100), 1)))

Massive Quartzite Dyke (F_n = 285 kN, p = 2.4 mm/rev, U = 28%) Schedule Double-Hit Check

Bore into 260 MPa high-quartz dyke rock: even jacking 19-inch cutter thrust up to B4 = 285 kN (12.54 MN head thrust in E2), shallow B6 = 2.40 mm/rev indentation (RC drops to B5 = 0.055, Torque E3 = 1.41 MN·m) plus abrasive ring replacements (B8 = 28% utilization) slashes Net ROP E4 to 1.08 m/h and collapses Daily Advance E5 4.5x to 7.3 m/day.

=IF(ISTEXT(E5), E5, ROUND((B3 * (B4 * B5) * (0.3 * B2)) / 1000, 2))

Try the example

Use the original values or change them to test your understanding.

Further reading