Arte SheetsLearn. Try. Understand.

Engineering & Science

Hayduk-Laudie Aqueous Diffusivity: An Estimate for Dilute Solutions

Estimate aqueous diffusivity with the Hayduk-Laudie correlation using water viscosity and the solute molar volume at its normal boiling point.

Estimating diffusivity of a dilute nonelectrolyte in water

The Hayduk-Laudie empirical correlation estimates molecular diffusion coefficients for dilute nonelectrolytes in water. The U.S. EPA includes it as one method in its site-assessment estimation tools; that does not make it a regulatory standard or guarantee accuracy for every compound. Use water viscosity μw in cP at the temperature of interest and solute molar volume VA at its normal boiling point in cm³/mol (often estimated by the Le Bas method).

For an illustrative benzene input of VA = 96.5 cm³/mol, the formula gives 1.026 × 10⁻⁵ cm²/s at μw = 0.890 cP and 0.662 × 10⁻⁵ cm²/s at μw = 1.307 cP, about 35.5% lower. These are estimates from the stated inputs, not measured results. Prefer appropriate measured or regulator-specified values where available, and check the correlation’s applicability before design use.

Groundwater TemperatureWater Viscosity μ_w (cP)Benzene D_w (V_A = 96.5 cm³/mol)Interpretation
25 °C Summer Water0.890 cP1.026 × 10^-5 cm²/sCorrelation estimate
10 °C Winter Groundwater1.307 cP0.662 × 10^-5 cm²/sLower estimated diffusivity
Invalid μ_w <= 0 or V_A <= 0Undefined"Invalid Hayduk-Laudie Inputs"Positive numeric inputs required

Hayduk-Laudie Aqueous Solute Diffusivity D_w (× 10^-5 cm²/s)

Evaluates 13.26 / (μ_w^1.14 * V_A^0.589) in units of 10^-5 cm^2/s from water viscosity B2 (cP) and solute LeBas molar volume B3 (cm^3/mol). Inputs must be numeric and positive.

=IF(OR(NOT(ISNUMBER(B2)), NOT(ISNUMBER(B3)), B2 <= 0, B3 <= 0), "Invalid Hayduk-Laudie Inputs", ROUND(13.26 / ((B2 ^ 1.14) * (B3 ^ 0.589)), 3))

Aqueous Schmidt Number Sc = μ_w / (ρ_w * D_w)

Computes dimensionless liquid Schmidt number (B2 * 0.01) / (B4 * (13.26E-5 / ((B2 ^ 1.14) * (B3 ^ 0.589)))) using water density B4 (g/cm^3) for mass-transfer Sherwood correlations. This uses the unrounded diffusivity estimate; inputs must be numeric and positive.

=IF(OR(NOT(ISNUMBER(B2)), NOT(ISNUMBER(B3)), NOT(ISNUMBER(B4)), B2 <= 0, B3 <= 0, B4 <= 0), "Invalid Hayduk-Laudie Inputs", ROUND((B2 * 0.01) / (B4 * (0.0001326 / ((B2 ^ 1.14) * (B3 ^ 0.589)))), 0))

Try the example

Use the original values or change them to test your understanding.

Further reading