Arte SheetsLearn. Try. Understand.

Healthcare & Clinical Formulas

Hill Equation: Saturation, Slope and Worked Examples

Explore a Hill saturation curve, its logit and the difference between two modeled saturations, with parameter and interpretation limits.

An empirical saturation curve

The Hill equation can describe fractional saturation as θ = 1 / [1 + (K / x)^n], where x is ligand concentration (or oxygen partial pressure in an illustrative hemoglobin model), K is the half-saturation value and n is the Hill coefficient. K and x must use the same units; at x = K the modeled saturation is 50%. The percentage formula multiplies θ by 100.

The coefficient describes curve shape; by itself it does not prove a unique molecular mechanism or reliably count binding sites. For receptor response curves EC50 describes half-maximal response, which need not be the same as a binding affinity. For oxygen, a fixed Hill curve is an approximation that does not capture all influences on real blood.

For a purely illustrative oxygen example with P50 26.6 mmHg and n = 2.8, the model gives 97.61% at 100 mmHg and 75.81% at 40 mmHg, a difference of 21.80 percentage points. With n = 1 and the same P50 the corresponding difference is 18.93 points, not double. A saturation difference alone is not total tissue oxygen delivery.

Illustrative oxygen pressureHill n = 2.8Hill n = 1
100 mmHg97.61%78.99%
40 mmHg75.81%60.06%
20 mmHg31.03%42.92%

Modeled saturation at one input

B2 is x (≥0), B3 the positive half-saturation value K, and B4 the positive Hill coefficient. At zero x the model limit is 0%.

=IF(COUNT(B2:B4)<>3,"Missing or nonnumeric input",IF(OR(B2<0,B3<=0,B4<=0),"Invalid parameters",IF(B2=0,0,ROUND(100/(1+(B3/B2)^B4),2))))

Hill-plot ordinate

For positive x, log10[θ/(1−θ)] = n × log10(x/K). The ordinate is undefined at zero or complete saturation.

=IF(COUNT(B2:B4)<>3,"Missing or nonnumeric input",IF(OR(B2<=0,B3<=0,B4<=0),"Invalid parameters",ROUND(B4*LOG10(B2/B3),4)))

Difference between two modeled saturations

B5 is a second x in the same units. The result is saturation at B2 minus saturation at B5, in percentage points; it may be negative if the order is reversed.

=IF(COUNT(B2:B5)<>4,"Missing or nonnumeric input",IF(OR(B2<0,B3<=0,B4<=0,B5<0),"Invalid parameters",ROUND(IF(B2=0,0,100/(1+(B3/B2)^B4))-IF(B5=0,0,100/(1+(B3/B5)^B4)),2)))

Try the example

Use the original values or change them to test your understanding.

Further reading