Frozen Dairy & Confectionery Engineering, Ice Cream Overrun % & FDA 21 CFR 135.110
Ice Cream Overrun %, Air Fraction & Gallon Weight Formula
Calculate Gravimetric Overrun (%), Dispersed Air Volume Fraction (%), Finished Gallon Net Weight (lb/gal vs FDA 4.50 lb/gal Minimum), and Continuous Freezer Volumetric Yield (L/h).
100% overrun does NOT mean 100% air—it means 50% dispersed air bubbles, and whipping past ~103% violates the US FDA 4.50 lb/gal legal weight floor
Scraped-surface continuous ice cream freezers whip filtered compressed air into aged liquid dairy mix of Unfrozen Mix Density Wmix (~1,080–1,110 g/L), expanding volume to Frozen Finished Density Wfrozen (g/L weighed on a tared 1.000-L overrun cup). Dairy technologists define Percentage Overrun relative to *unfrozen mix volume* ((Vfrozen - Vmix) / Vmix), which at constant mass equals **Overrun% = ((Wmix - Wfrozen) / Wfrozen) * 100% (25%–35% Italian gelato, 40%–60% super-premium pints, 80%–95% economy tubs), whereas True Dispersed Air Volume Fraction phiair% = ((Wmix - Wfrozen) / Wmix) * 100% = Overrun% / (1 + Overrun%/100). Crucially, US FDA 21 CFR 135.110 mandates that finished ice cream weigh at least 4.50 lb per US Gallon** ((Wfrozen * 3.78541178) / 453.59237 >= 4.50 lb/gal, ~539.3 g/L minimum) so consumers aren’t sold foam.
Verify on a Continuous Barrel Freezer Line—Aged_Liquid_Mix_Density Wmix = 1,096 g/L (B2), Tared_1L_Frozen_Cup Wfrozen = 602 g/L (B3), and Liquid_Mix_Pump_Rate Qmix = 650 L/h (B4): Overrun equals 82.06% (E2), Dispersed Air Fraction equals 45.07% (E3), Finished Gallon Weight hits 5.02 lb/gal (>= 4.50 FDA legal floor. E4), and Volumetric Tub Filler Output reaches 1,183.4 L/h (E5).
| FDA 21 CFR 135.110 Ice Cream Overrun KPI (Mix=1,096 g/L, 650 L/h, Frozen=602 vs 505 g/L) | Formula | Verified Output |
|---|---|---|
| Gravimetric Overrun (%) | ((Mix_g_L - Frozen_g_L) / Frozen_g_L) * 100 | 82.06% (117.03% over-whipped @ 505 g/L) |
| Dispersed Air Volume Fraction (%) | ((Mix_g_L - Frozen_g_L) / Mix_g_L) * 100 | 45.07% (53.92% air foam @ 505 g/L) |
| Finished US Gallon Weight (lb/gal) | (Frozen_g_L * 3.78541178) / 453.59237 | 5.02 lb/gal (4.21 < 4.50 ILLEGAL @ 505 g/L) |
| Volumetric Freezer Output (L/h) | Mix_Feed_L_h * (Mix_g_L / Frozen_g_L) | 1,183.4 L/h (1,410.7 L/h @ 505 g/L) |
Gravimetric Overrun Cup, Air Volume Fraction & FDA lb/gal Compliance Formula
Validate Mix_Density Wmix in [1,000, 1,250] g/L, Frozen_Density Wfrozen in [350, Wmix] g/L, and Mix_Flow Qmix > 0 L/h.
=LET(wm_g, B2, wf_g, B3, qm_l, B4, IF(OR(wm_g < 1000, wm_g > 1250, wf_g < 350, wf_g > wm_g, qm_l <= 0), "Invalid Freezer Input", ROUND(qm_l * (wm_g / wf_g), 1)))Over-Whipped 505 g/L Cup (117% Overrun) FDA Short-Weight Rejection Check (Set Frozen Cup B3 = 505 g/L)
Open the dasher air-metering valve until 1-L cup weight drops to Wfrozen B3 = 505 g/L: Overrun E2 climbs to 117.03% (53.92% air in E3), dropping Finished Gallon Weight E4 to 4.21 lb/gal—below the 4.50 lb/gal federal standard of identity, forcing quarantine or downgrading out of "Ice Cream" labeling.
=IF(ISTEXT(E5), E5, ROUND((B3 * 3.78541178) / 453.59237, 2))Try the example
Use the original values or change them to test your understanding.