Arte SheetsLearn. Try. Understand.

Additive Repair & Surface Hardfacing, Coaxial Laser Cladding / DED Dilution & Catchment

Laser Cladding Dilution Ratio & Powder Catchment Formula

Calculate Metallographic Clad Dilution Ratio (%), Deposited Alloy Mass Rate (g/min), Coaxial Powder Catchment Efficiency (%), and Specific Laser Energy (J/mm²).

Turn up laser power to "fuse better" during Inconel 625 cladding and 35% iron dilution ruins offshore subsea corrosion resistance

Coaxial Blown-Powder Laser Cladding (Directed Energy Deposition DED) blows Stellite 6, WC-Co, or Inconel 625 superalloy powder (Mass Feed Rate dot_mfeed g/min, Alloy Density rho g/cm³) into a laser melt pool (Power P W, Spot Diameter D mm, Traverse Speed v mm/s) to armor carbon-steel oilfield valves and turbine blades. Transverse metallographic cross-sections separate Reinforcement Clad Area Above Original Surface Aclad (mm²) from Melted Substrate Penetration Area Amelt (mm²), defining **Geometrical Dilution D% = (Amelt / (Aclad + Amelt)) * 100% (ISO 15614-7 / API 6A CRA qualification demands 3% <= D% <= 12%—below 3% risks lack-of-fusion peeling; above 15% poisons the Inconel/Stellite overlay with dissolved substrate iron), while Deposited Rate dot_mdep = ((Aclad * v * 60) / 1,000) * rho (g/min) measures Powder Catchment Efficiency eta_p% = (dot_mdep / dot_mfeed) * 100% and Specific Energy E_s = P / (D * v)** (J/mm²).

Verify on an API 6A Inconel 625 (rho = 8.44 g/cm³) Subsea Valve Bore Clad—Above-Surface_Clad_Area Aclad = 2.85 mm² (B2), Substrate_Melt_Area Amelt = 0.30 mm² (B3), CNC_Traverse_Speed v = 14.0 mm/s (B4), Powder_Feeder_Rate dot_mfeed = 24.0 g/min (B5), Inconel_Density rho = 8.44 g/cm³ (B6), Fiber_Laser_Power P = 1,800 W (B7), and Spot_Size D = 3.20 mm (B8): Dilution hits the sweet spot at 9.52% (<= 10% Fe limit. E2), Deposited Alloy equals 20.21 g/min (E3 = 84.2% powder catchment in E4), and Specific Energy equals 40.18 J/mm² (E5).

ISO 15614-7 Laser Cladding KPI (Inconel 8.44 g/cm³, 24 g/min, D=3.2 mm)FormulaVerified Output
Metallographic Dilution D (%)(Melt_Area_mm2 / (Clad_mm2 + Melt_mm2)) * 1009.52% (35.38% IRON CONTAMINATION @ 2.6 kW)
Deposited Clad Rate (g/min)((Clad_Area_mm2 * v_mm_s * 60) / 1000) * rho20.21 g/min (8.51 g/min @ slow 8 mm/s)
Powder Catchment Eff (%)(Deposited_g_min / Powder_Feed_g_min) * 10084.2% (35.4% ricochet waste @ 2.6 kW)
Specific Laser Energy (J/mm²)Laser_Power_W / (Spot_Diam_mm * v_mm_s)40.18 J/mm² (101.56 J/mm² over-melted)

DED Metallographic Dilution, Mass Deposition & Specific Laser Fluence Formula

Validate Clad_Area Aclad > 0.05 mm², Melt_Area Amelt >= 0, Traverse v > 0.5 mm/s, Powder_Feed > 0.5 g/min, Density in [2.0, 20.0] g/cm³, Power P > 50 W, Spot D > 0.2 mm, and physical Deposited_Rate <= Powder_Feed.

=LET(ac_m, B2, am_m, B3, vs_m, B4, mf_g, B5, rc_g, B6, pl_w, B7, ds_m, B8, md_g, ((ac_m * vs_m * 60) / 1000) * rc_g, IF(OR(ac_m <= 0.05, am_m < 0, vs_m <= 0.5, mf_g <= 0.5, rc_g < 2, rc_g > 20, pl_w <= 50, ds_m <= 0.2, md_g > mf_g), "Invalid Cladding Input", ROUND(pl_w / (ds_m * vs_m), 2)))

Over-Powered 2,600 W / 8 mm/s Iron-Dilution Reject Check

Boost power to 2,600 W and slow travel to 8.0 mm/s (B2 = 2.10, B3 = 1.15, B4 = 8, B7 = 2600): Specific Energy E5 jumps 2.5x to 101.56 J/mm², digging deep into the carbon-steel base metal and driving Dilution E2 to 35.38%—failing API 6A Fe5 spectroscopy and causing hot solidification cracking.

=IF(ISTEXT(E5), E5, ROUND((B3 / (B2 + B3)) * 100, 2))

Try the example

Use the original values or change them to test your understanding.

Further reading