Clinical Medicine & Physiology
Bioelectrical Impedance: Height² / Resistance and Body-Water Estimates
Explore a bioelectrical impedance index, a published Kushner body-water prediction and a separate fat-free-mass approximation, with limitations of the underlying assumptions.
What height squared divided by resistance means
In a simplified uniform-conductor model, volume is proportional to length squared divided by electrical resistance. Height²/resistance is therefore used as an empirical index in bioelectrical impedance analysis (BIA). A human body is not a uniform cylinder; electrode placement, fluid distribution, measurement conditions and population differences can affect the relationship.
Kushner and colleagues’ 1992 study combined data from 62 adults, 37 prepubertal children, 44 preschool children and 32 premature infants. One commonly reproduced version of their combined prediction uses total body water (kg) ≈ 0.593 × height²/resistance + 0.065 × weight + 0.04, with height in cm, resistance in ohms and weight in kg. The abstract rounds the first coefficient to 0.59. It is not an adult-only equation and it does not directly measure a person’s hydration status.
| Height; weight; resistance | Height² / resistance (cm²/ohm) | Predicted water (kg) | Illustrative FFM (kg) |
|---|---|---|---|
| 175 cm; 82 kg; 430 ohm | 71.22 | 47.60 | 65.03 |
| 175 cm; 76 kg; 510 ohm | 60.05 | 40.59 | 55.45 |
| 175 cm; 68 kg; 625 ohm | 49.00 | 33.52 | 45.79 |
Enter the total-body-water prediction
Enter height in centimetres in B2, weight in kilograms in B3 and measured 50-kHz resistance in ohms in B4. Put this formula in B5; it keeps the unrounded prediction. The limits are exercise guards, not evidence that the equation applies to every person or instrument.
=IF(COUNT(B2:B4)<>3,"Enter numeric height, weight and resistance",IF(OR(B2<100,B2>230,B3<25,B3>250,B4<150,B4>1200),"Check example inputs",0.593*(B2^2/B4)+0.065*B3+0.04))Display the predicted water
For the numerical exercise, display the B5 estimate in kilograms rounded to two decimals. One kilogram of water is approximately one litre; this approximation does not make the prediction a direct measurement.
=IF(ISNUMBER(B5),ROUND(B5,2),B5)An additional fat-free-mass assumption
Dividing predicted total body water by 0.732 illustrates a common average hydration assumption for adult fat-free mass. This is a second assumption, not a separate Lukaski equation. Hydration of fat-free mass varies with age and physiological condition; the calculation is not suitable for diagnosing sarcopenia or prescribing clinical care.
=IF(ISNUMBER(B5),IF(B5/0.732>B3,"Check model assumptions",ROUND(B5/0.732,2)),B5)Try the example
Use the original values or change them to test your understanding.