Arte SheetsLearn. Try. Understand.

Underground Caverns, Drill-and-Blast Tunneling & NATM, NGI Barton Q-System

NGI Barton Tunneling Q-System & Roof Support Formula

Calculate Logarithmic NGI Rock Mass Quality Q (0.001–1,000), Equivalent Excavation Dimension De (m), Maximum Permanent Unsupported Span (m), and Crown Support Pressure (kPa).

Clay-coated slickensided joints drop Barton’s Q-index across six orders of magnitude—multiplying permanent cavern roof support pressure 10x

Developed at the Norwegian Geotechnical Institute (NGI) by Nick Barton, Lien & Lunde (1974), the Tunneling Q-System spans six logarithmic decades (0.001 squeezing clay fault to 1,000 massive unjointed granite) as the product of Three Physical Quotients: **Q = (RQD / J_n) * (J_r / J_a) * (J_w / SRF)—where RQD / J_n (Joint Set Number 0.5–20) sizes Relative Block Volume, J_r / J_a (Roughness 0.5–4 over Clay Alteration 0.75–20) measures Inter-Block Shear Friction ~tan(phi_r), and J_w / SRF (Joint Water / Stress Reduction Factor) captures Active Effective Stress. Scaling Excavation Span B (m) by Excavation Support Ratio ESR (1.0 road/rail tunnel & powerhouse, 1.6 mine haulage, 0.8 nuclear/public station) defines Equivalent Dimension D_e = B / ESR, Maximum Permanent Unsupported Span Smax = 2 * ESR * Q^0.4 (m), and Barton Permanent Roof Support Pressure Proof = (200 / J_r) * Q^(-1/3)** (kPa).

Verify on a 9.60 m Span Underground Hydro Powerhouse Access Tunnel (ESR = 1.0)—Deere RQD = 72% (B2), Two_Joint_Sets+Random J_n = 6.0 (B3), Smooth_Undulating_Roughness J_r = 2.0 (B4), Unaltered_Joint_Walls J_a = 1.0 (B5), Minor_Inflow_Medium_Stress J_w / SRF = 0.264 (0.66 / 2.5, B6), Excavation_Span B = 9.60 m (B7), and ESR = 1.0 (B8): Q equals 6.336 (Fair/Good, E2), D_e equals 9.60 m (E3), Max Unsupported Span equals 4.19 m (< 9.60 m -> systematic rockbolting + 50 mm fiber shotcrete required. E4), and Permanent Crown Support Pressure equals 54.0 kPa (E5).

NGI Barton Q-System KPI (Span B=9.60 m, ESR=1.0: Good Gneiss vs Swelling Clay Fault)FormulaVerified Output
NGI Rock Mass Quality Index Q(RQD / Jn) * (Jr / Ja) * Jw_Over_SRF6.336 Fair/Good (0.046 Extremely Poor)
Equivalent Excavation Dim De (m)Tunnel_Span_B_m / Support_Ratio_ESR9.60 m
Max Unsupported Span Smax (m)2 * ESR * (Q ^ 0.4)4.19 m (0.58 m immediate face collapse)
Permanent Roof Support Load (kPa)(200 / Roughness_Jr) * (Q ^ (-1/3))54.0 kPa (558.9 kPa cast concrete arch)

Barton, Lien & Lunde (1974) Three-Quotient Q-Index & Crown Support Formula

Validate RQD in [10, 100] (NGI rule: assign RQD = 10 whenever nominal RQD < 10), J_n in [0.5, 20], J_r in [0.5, 4.0], J_a in [0.75, 20], J_w / SRF in [0.005, 2.0], Span B in [1.5, 60] m, and ESR in [0.5, 5.0].

=LET(rq_d, B2, jn_s, B3, jr_n, B4, ja_n, B5, jw_s, B6, bs_m, B7, es_r, B8, qv_l, (rq_d / jn_s) * (jr_n / ja_n) * jw_s, IF(OR(rq_d < 10, rq_d > 100, jn_s < 0.5, jn_s > 20, jr_n < 0.5, jr_n > 4, ja_n < 0.75, ja_n > 20, jw_s < 0.005, jw_s > 2, bs_m < 1.5, bs_m > 60, es_r < 0.5, es_r > 5), "Invalid Barton Q Input", ROUND((200 / jr_n) * (qv_l ^ (-1 / 3)), 1)))

Crushed Clay-Gouge Fault Zone (Q = 0.046 Extremely Poor Rock) 559 kPa Load Check

Intersect a sheared smectite-clay fault (RQD = 22, J_n = 12, J_r = 1.0, J_a = 4.0, J_w / SRF = 0.10): Q E2 plunges 138x to 0.046, Unsupported Span E4 shrinks to 0.58 m, and Permanent Crown Support Pressure E5 surges 10.3x to 558.9 kPa (5.6 bar)—mandating spiling, steel ribs, and reinforced concrete lining.

=IF(ISTEXT(E5), E5, LET(qv_l, (B2 / B3) * (B4 / B5) * B6, ROUND(2 * B8 * (qv_l ^ 0.4), 2)))

Try the example

Use the original values or change them to test your understanding.

Further reading