Precision Aerospace & Optical Tooling, Nickel Sulfamate Electroforming & Throwing Power
Nickel Electroforming Wall Rate & Haring-Blum Throwing Power
Calculate Faraday Nickel Deposition Rate (um/h), Electroformed Mandrel Shell Thickness (um and mm), and Field-Modified Haring-Blum Throwing Power (%).
Negative throwing power (-10.1%) in an un-shielded sulfamate bath starves deep optical mandrel recesses while growing thick "dog-bone" nodules on outer corners
Nickel Sulfamate (Ni(SO_3NH_2)_2) Mandrel Electroforming grows zero-internal-stress freestanding rocket thrust-chamber liners, helicopter rotor abrasion shields, and holographic stamper shims (MNi = 58.6934 g/mol, n = 2, rhoNi = 8.908 g/cm³) at **Faraday Wall Growth Rate rNi = (((J / 100) * 3,600 * 58.6934 * (eta_c / 100)) / (2 * 96,485.332 * 8.908)) * 10,000 (um/h at Current Density J A/dm² and Cathode Efficiency eta_c %). Yet average thickness h = rNi * t (um) means nothing if deep mandrel grooves plate thin: in a Haring-Blum Rectangular Test Cell (Far-to-Near Anode Distance Ratio K = Lfar / Lnear, typically K = 3 or 5) measuring Plated Near-to-Far Cathode Mass Ratio M = mnear / mfar, Samuel Field’s (1934) Normalized Throwing Power TP = ((K - M) / (K + M - 2)) * 100% spans +100% (perfectly uniform wall M = 1) through 0% (pure primary geometric current M = K) down to negative % (M > K)** whenever local hydrogen evolution drops cathode efficiency inside low-current recesses.
Verify on a Low-Stress Optical Stamper Electroforming Bath—Cathode_Current_Density J = 4.50 A/dm² (B2), Cathode_Efficiency eta_c = 98.0% (B3), Plating_Duration t = 6.50 h (B4), Haring-Blum_Distance_Ratio K = 3.00 (B5), and Measured_Near/Far_Weight_Ratio M = 2.15 (B6): Deposition Rate equals 54.21 um/h (E2), Electroformed Shell Wall reaches 352.3 um (0.352 mm in E4), and Field Throwing Power equals +26.98% (E5, polarization-smoothed thickness distribution).
| Nickel Sulfamate Electroforming KPI (J=4.5 A/dm², Eff=98%, t=6.5 h, K=3.0) | Formula | Verified Output |
|---|---|---|
| Faraday Deposition Rate (um/h) | (((J / 100) * 3600 * 58.6934 * Eff) / (2 * F * 8.908)) * 1e4 | 54.21 um/h |
| Electroformed Shell Wall (um) | Plating_Rate_um_hr * Duration_hr | 352.3 um |
| Finished Shell Wall (mm) | Shell_Wall_um / 1000 | 0.352 mm precision shim |
| Field Haring-Blum Throwing Power (%) | ((Dist_Ratio_K - Mass_Ratio_M) / (K + M - 2)) * 100 | +26.98% (-10.11% corner dog-boning) |
Faraday Nickel Sulfamate Growth & Field-Modified Haring-Blum Throwing Power Formula
Validate Current_Density J in [0.5, 30] A/dm², Cathode_Efficiency in [50, 100]%, Electroform_Time in [0.1, 500] h, Haring-Blum Geometry Ratio K in [1.5, 10], and Mass_Ratio M in [1.0, 20].
=LET(jd_a, B2, ce_p, B3, tm_h, B4, kr_d, B5, mr_w, B6, IF(OR(jd_a < 0.5, jd_a > 30, ce_p < 50, ce_p > 100, tm_h < 0.1, tm_h > 500, kr_d < 1.5, kr_d > 10, mr_w < 1, mr_w > 20), "Invalid Electroform Input", ROUND(((kr_d - mr_w) / (kr_d + mr_w - 2)) * 100, 2)))Chloride-Contaminated High-Current Bath (M = 3.45 > K = 3.0) Dog-Bone Corner Check
Push high current without non-conductive current-thief shields where low-CD recess efficiency sags (M climbs to B6 = 3.45 > K = 3.0): Field Throwing Power E5 flips negative to -10.11%—meaning outer mandrel edges build 3.45x thicker than deep grooves, demanding conformal auxiliary anodes or PVC robber shields.
=IF(ISTEXT(E5), E5, ROUND((((B2 / 100) * 3600 * 58.6934 * (B3 / 100)) / (2 * 96485.332 * 8.908)) * 10000, 2))Try the example
Use the original values or change them to test your understanding.