Arte SheetsLearn. Try. Understand.

Petroleum & Geothermal Wellbore Hydraulics, API Hole Cleaning & Equivalent Circulating Density

Drilling Annular Velocity, Cuttings Transport & ECD Formula

Calculate Open-Hole Annular Mud Velocity Va (m/min), Net Upward Cuttings Rise Velocity (m/min), Sifferman Cuttings Transport Ratio Ft (%), and Equivalent Circulating Density ECD (SG).

Wash out an 8.5-inch shale borehole to 12.25 inches on one mud pump and cuttings fall BACKWARD onto your BHA—sticking the drillstring

During rotary/PDC oilwell and geothermal drilling, mud pumped at Q (L/min) jets out bit nozzles and returns up the concentric annulus between Open-Hole Diameter D_h (mm) and Drillpipe Outer Diameter D_p (mm, Cross-Sectional Area Aann = (PI() / 4) * ((D_h / 1,000)^2 - (D_p / 1,000)^2) m²) at Mean Annular Velocity V_a = (Q / 1,000) / Aann (m/min). Meanwhile, dense 2.65-SG rock cuttings settle downward relative to the rising mud at hindered Cuttings Slip Velocity V_s (m/min): hence Net Upward Cuttings Rise Vnet = V_a - V_s (m/min) and **Sifferman Cuttings Transport Ratio F_t = ((V_a - V_s) / V_a) * 100% MUST stay >= 50%–55%** (V_a >= 2 * V_s) for clean hole transport (F_t <= 0% means cuttings sink and pack off the bottomhole assembly). Simultaneously, Annular Friction Pressure Loss Delta_P_a (kPa) adds to Static Mud Specific Gravity SGmud over True Vertical Depth TVD (m), raising bottomhole **Equivalent Circulating Density ECD = SGmud + Delta_P_a / (9.80665 * TVD)** (SG) toward the formation fracture gradient.

Verify on an 8.5-inch (215.9 mm) Production Hole with 5-inch (127.0 mm) Drillpipe—Mud_Pump_Rate Q = 2,400 L/min (B2), Hole_ID D_h = 215.9 mm (B3), Drillpipe_OD D_p = 127.0 mm (B4), Cuttings_Slip_Velocity V_s = 18.5 m/min (B5), Static_Mud_Weight SG = 1.320 (B6), Annular_Friction_Loss Delta_P_a = 1,850 kPa (B7), and TVD = 2,850 m (B8): Annular Mud Velocity reaches 100.24 m/min (E2), Net Cuttings Rise equals 81.74 m/min (E3), Transport Ratio hits a brisk 81.54% (E4), and Bottomhole ECD equals 1.386 SG (E5).

API Hole-Cleaning & ECD KPI (Dp=127 mm, Vs=18.5 m/min, SG=1.32, TVD=2,850 m)FormulaVerified Output
Annular Mud Velocity Va (m/min)(Flow_L_min / 1000) / ((PI()/4)*(Dh^2 - Dp^2))100.24 m/min (18.14 m/min @ washout)
Net Cuttings Rise Velocity (m/min)Annular_Vel_Va - Cuttings_Slip_Vs81.74 m/min (-0.36 m/min SINKING)
Cuttings Transport Ratio Ft (%)((Va - Vs) / Va) * 100 (>= 55% clean hole)81.54% (-1.98% PACK-OFF STUCK PIPE)
Equivalent Circulating Density (SG)Static_SG + Annular_dP_kPa / (9.80665 * TVD_m)1.386 SG (+0.066 SG dynamic friction)

API RP 13D Annular Hole-Cleaning Transport Ratio & Dynamic ECD Formula

Validate Pump_Flow Q > 50 L/min, Drillpipe_OD >= 40 mm, Hole_ID >= Drillpipe_OD + 20 mm, Slip_Velocity V_s >= 0 m/min, Static_SG in [0.80, 2.60], Annular_dP >= 0 kPa, and TVD >= 100 m.

=LET(qm_l, B2, dh_m, B3, dp_m, B4, vs_m, B5, sg_m, B6, fp_k, B7, tv_m, B8, IF(OR(qm_l <= 50, dp_m < 40, dh_m < dp_m + 20, vs_m < 0, sg_m < 0.8, sg_m > 2.6, fp_k < 0, tv_m < 100), "Invalid Annular Input", ROUND(sg_m + (fp_k / (9.80665 * tv_m)), 3)))

12.25-Inch Shale Washout on Single Triplex Pump (Q = 1,150 L/min, D_h = 311.2 mm) Pack-Off Check

Take one mud pump offline for liner maintenance (B2 = 1150 L/min) across an enlarged 12.25-inch (B3 = 311.2 mm) shale washout: Annular Velocity E2 collapses 5.5x to 18.14 m/min—slower than 18.5 m/min Cuttings Slip. Net Rise E3 turns negative (-0.36 m/min, Transport Ratio E4 = -1.98%), avalanching cavings back onto the drill collars.

=IF(ISTEXT(E5), E5, LET(aa_m, (PI() / 4) * (((B3 / 1000) ^ 2) - ((B4 / 1000) ^ 2)), va_m, (B2 / 1000) / aa_m, ROUND(((va_m - B5) / va_m) * 100, 2)))

Try the example

Use the original values or change them to test your understanding.

Further reading