Arte SheetsLearn. Try. Understand.

Architectural Acoustics & Auditorium Timber Baffles, Ingard-Fok Perforated Resonant Panel

Perforated Acoustic Panel Porosity & Peak Hz Formula

Calculate Square-Grid Perforation Open-Area Porosity (%), Ingard-Fok Hole-Interaction Effective Neck Length teff (mm), Resonant Peak Absorption Frequency f0 (Hz), and Wavelength (m).

Ignoring Ingard-Fok hole-to-hole radiation end correction over-predicts perforated wood auditorium wall resonant frequency by 12%

Perforated timber auditorium wall panels and micro-perforated ceiling baffles (Hole Diameter d mm on Square Pitch b mm across Panel Thickness t mm backed by a Mineral-Wool Air Cavity of Depth D mm) act NOT as porous foam, but as a Coupled Array of Distributed Helmholtz Resonators. Square-grid drilling fixes **Open-Area Porosity epsilon = (PI() * d^2) / (4 * b^2); however, oscillating air plugs inside each hole radiate acoustic mass beyond both faces while interacting hydrodynamically with neighboring holes per Ingard (1953) & Fok’s Interaction End-Correction teff = t + 0.8 * d * (1 - 1.47 * SQRT(epsilon) + 0.47 * epsilon^1.5) (mm). Coupling air-plug inertance teff against cavity compliance D tunes Peak Sound Absorption Frequency f_0 = (c / (2 * PI())) * SQRT(epsilon / ((teff / 1,000) * (D / 1,000)))** (Hz, at acoustic wavelength lambda_0 = c / f_0 m) right onto 250–1,000 Hz human speech muddiness.

Verify on a 12.0 mm Birch Plywood Auditorium Acoustic Panel—Hole_Diameter d = 6.0 mm (B2), Square_Grid_Pitch b = 24.0 mm (B3), Panel_Thickness t = 12.0 mm (B4), Backing_Cavity_Depth D = 65.0 mm (B5), and 20°C Speed_of_Sound c = 343.0 m/s (B6): Open-Area Porosity equals 4.91% (E2), Ingard-Fok Effective Neck Length teff equals 15.26 mm (+27% longer than 12 mm wood alone. E3), Peak Absorption Frequency f_0 tunes cleanly to 384.0 Hz (E4), and Resonant Wavelength equals 0.893 m (E5).

Ingard-Fok Perforated Absorber KPI (Panel t=12 mm, Sound Speed c=343 m/s)FormulaVerified Output
Open-Area Porosity epsilon (%)((PI() * d_mm^2) / (4 * Pitch_b_mm^2)) * 1004.91% low-mid tune (19.63% transparent)
Effective Neck Length teff (mm)t + 0.8*d*(1 - 1.47*SQRT(eps) + 0.47*eps^1.5)15.26 mm (14.49 mm @ dense pitch)
Resonant Peak Frequency f0 (Hz)(c / (2*PI())) * SQRT(eps / ((teff/1000)*(D/1000)))384.0 Hz warm speech (1,074.0 Hz @ 19.6%)
Resonant Acoustic Wavelength (m)Speed_Of_Sound_c_m_s / Peak_Freq_f0_Hz0.893 m (0.319 m @ 1,074 Hz)

Ingard-Fok Coupled-Aperture End Correction & Distributed Helmholtz f0 Formula

Validate Hole_Diameter d in [0.3, 30] mm, Pitch b >= 1.5 * d, Panel_Thickness t in [0.5, 50] mm, Cavity_Depth D in [10, 600] mm, and Sound_Speed c in [310, 370] m/s.

=LET(dm_h, B2, bp_m, B3, tp_m, B4, dc_m, B5, cs_m, B6, ep_s, (PI() * (dm_h ^ 2)) / (4 * (bp_m ^ 2)), te_f, tp_m + 0.8 * dm_h * (1 - 1.47 * SQRT(ep_s) + 0.47 * (ep_s ^ 1.5)), f0_h, (cs_m / (2 * PI())) * SQRT(ep_s / ((te_f / 1000) * (dc_m / 1000))), IF(OR(dm_h < 0.3, dm_h > 30, bp_m < 1.5 * dm_h, tp_m < 0.5, tp_m > 50, dc_m < 10, dc_m > 600, cs_m < 310, cs_m > 370), "Invalid Panel Input", ROUND(cs_m / f0_h, 3)))

High-Porosity 19.6% Grille + Shallow 35 mm Furring (d = 8 mm, b = 16 mm, D = 35 mm) Check

Drill 8.0 mm holes on tight 16.0 mm centers over shallow 35.0 mm furring (B2 = 8, B3 = 16, B5 = 35): Porosity E2 quadruples to 19.63%, mutual hole interaction shrinks end correction (teff = 14.49 mm in E3), and Resonant Peak E4 shifts nearly 3x upward to 1,074.0 Hz (0.319 m wavelength in E5)—leaving 250–500 Hz room boom completely untreated.

=IF(ISTEXT(E5), E5, LET(ep_s, (PI() * (B2 ^ 2)) / (4 * (B3 ^ 2)), te_f, B4 + 0.8 * B2 * (1 - 1.47 * SQRT(ep_s) + 0.47 * (ep_s ^ 1.5)), ROUND((B6 / (2 * PI())) * SQRT(ep_s / ((te_f / 1000) * (B5 / 1000))), 1)))

Try the example

Use the original values or change them to test your understanding.

Further reading