Powder Metallurgy, Metal Injection Molding (MIM) & Technical Ceramics, Sintering Shrinkage
Sintering Linear Shrinkage & Die Tooling Oversize Formula
Calculate Volumetric Sintering Shrinkage (%), Isotropic Linear Shrinkage 1 - (rho_g/rho_s)^(1/3) (%), Tooling Oversize Scale Factor, and Green Die Cavity Dimension (mm).
Multiplying a 32 mm finished MIM gear by (1 + 0.1394) cuts the mold cavity 0.72 mm UNDERSIZE—because tooling scale is 1 / (1 - S_L), NOT 1 + S_L
In Metal Injection Molding (MIM), Binder-Jet 3D Printing, WC-Co Hardmetal Pressing, and Alumina/Zirconia Sintering, a porous De-bound Brown/Green Compact of Density rho_g (g/cm³) densifies at 1,250–1,600°C by grain-boundary/volume diffusion to Final Sintered Density rho_s (g/cm³) at constant metal/ceramic mass (m_g = m_s -> V_s / V_g = rho_g / rho_s). Hence **Volumetric Shrinkage Delta_V / V_0 = (1 - rho_g / rho_s) * 100% maps via exact cube-root geometry to Isotropic Linear Shrinkage S_L = 1 - (rho_g / rho_s)^(1/3)** (defined relative to *green* tooling length L_0: S_L = (L_0 - L_f) / L_0). Consequently, to hit Target Finished Dimension L_f (mm), the EDM toolmaker MUST machine the cavity to Oversize Scale Factor OSF = L_0 / L_f = 1 / (1 - S_L) = (rho_s / rho_g)^(1/3)—NEVER 1 + S_L.
Verify on a 17-4PH Stainless-Steel MIM Surgical Jaw—De-bound_Green_Density rho_g = 4.92 g/cm³ (63.7% solids loading, B2), Vacuum-Sintered_Density rho_s = 7.72 g/cm³ (98.3% theoretical, B3), and Target_Finished_Length L_f = 32.000 mm (B4): Volumetric Shrinkage equals 36.27% (E2), Linear Shrinkage S_L equals 13.94% (E3), True Tooling Oversize Factor equals 1.1620 (E4, vs naive 1.1394), and Required Mold Cavity Length equals 37.185 mm (E5—whereas naive 32 * 1.1394 = 36.461 mm scraps an expensive $25,000 H13 mold cavity 0.724 mm undersize).
| MIM vs Die-Pressed PM Sintering KPI (Target L_f = 32.000 mm) | Formula | Verified Output |
|---|---|---|
| Volumetric Shrinkage (%) | (1 - (Green_Rho / Sintered_Rho)) * 100 | 36.27% MIM (8.05% uniaxial PM) |
| Isotropic Linear Shrinkage SL (%) | (1 - ((Green_Rho / Sintered_Rho) ^ (1/3))) * 100 | 13.94% MIM (2.76% uniaxial PM) |
| Exact Tooling Oversize Factor (OSF) | 1 / ((Green_Rho / Sintered_Rho) ^ (1/3)) | 1.1620 (vs wrong 1+SL = 1.1394) |
| Required Mold / Die Cavity L0 (mm) | Target_Dim_mm / ((Green_Rho / Sintered_Rho) ^ (1/3)) | 37.185 mm MIM (32.908 mm PM) |
Mass-Conserved Cube-Root Sintering Shrinkage & Tooling Cavity Scale Formula
Validate Green_Density rho_g > 0.5 g/cm³, Sintered_Density rho_s > rho_g up to 22.5 g/cm³ (tungsten/platinum), realistic packing ratio rho_g / rho_s >= 0.35, and Target_Dimension L_f > 0.1 mm.
=LET(rg_d, B2, rs_d, B3, lf_m, B4, lr_t, (rg_d / rs_d) ^ (1 / 3), IF(OR(rg_d <= 0.5, rs_d <= rg_d, rs_d > 22.5, (rg_d / rs_d) < 0.35, lf_m <= 0.1), "Invalid Sintering Input", ROUND(lf_m / lr_t, 3)))Uniaxial Die-Compacted PM Steel Gear (rho_g = 6.85 -> rho_s = 7.45 g/cm³) Low-Shrinkage Check
Compare against conventional 600-MPa uniaxially die-pressed FN-0205 PM steel (B2 = 6.85, B3 = 7.45 g/cm³): Volumetric Shrinkage drops to 8.05% (E2), Linear Shrinkage to 2.76% (E3), Oversize Factor to 1.0284 (E4), and Die Cavity Size to 32.908 mm (E5).
=IF(ISTEXT(E5), E5, ROUND(1 / ((B2 / B3) ^ (1 / 3)), 4))Try the example
Use the original values or change them to test your understanding.