Arte SheetsLearn. Try. Understand.

Chemical & Pharmaceutical Solid-Liquid Separation, Ruth Cake Filtration & Filter Press

Ruth Constant-Pressure Cake Filtration Time Formula

Calculate Total Dry Filter Cake Deposited (kg), Parabolic Cake-Resistance Filtration Time (min), Linear Filter-Cloth Resistance Time (min), and Total Cycle Filtration Time (min).

Doubling filtrate volume in a recessed-plate filter press takes FOUR TIMES longer—because every liter of filtrate builds thicker cake resistance

Recessed-plate and membrane Filter Presses pump slurry of Dry-Cake-Mass-per-Filtrate-Volume c (kg/m³) and Filtrate Viscosity mu (mPa·s = 10^{-3} Pa·s) across Filter Cloth Area A (m²) at Constant Pressure Drop Delta_P (kPa = 10^3 Pa). Unlike clean-liquid membrane microfiltration (t ~ V), accumulating filter cake adds hydraulic resistance proportional to Cumulative Filtrate Volume V (m³). Integrating Darcy’s Law across Specific Cake Resistance alpha (10^{10} m/kg) in series with Filter-Cloth Resistance R_m (10^{10} m⁻¹) yields B. F. Ruth’s Constant-Pressure Filtration Equation: **t = ((mu * alpha * c) / (2 * A^2 * Delta_P)) * V^2 + ((mu * R_m) / (A * Delta_P)) * V (s, / 60 = min)—separating Quadratic Cake Time tcake ~ V^2 from Linear Cloth Time tcloth ~ V**.

Verify on a 16.0 m² Pharmaceutical Precipitate Filter Press—Filter_Area A = 16.0 m² (B2), Feed_Pressure Delta_P = 450 kPa (B3), Mother-Liquor_Viscosity mu = 1.15 mPa·s (B4), Specific_Cake_Resistance alpha = 8.5 (x 10^10 m/kg, B5), Dry_Solids_Concentration c = 65.0 kg/m³ (B6), Polypropylene_Cloth_Resistance R_m = 4.2 (x 10^10 m⁻¹, B7), and Batch_Filtrate_Volume V = 4.80 m³ (B8): Deposited Dry Cake equals 312.0 kg (E2), Parabolic Cake Time takes 10.59 min (E3), Cloth Resistance adds 0.54 min (E4), and Total Filtration Time equals 11.13 min (E5).

Ruth Filter-Press KPI (A=16 m², dP=450 kPa, V=4.8 m³, c=65 kg/m³, alpha=8.5 vs 24.0e10)FormulaVerified Output
Deposited Dry Filter Cake (kg)Dry_Solids_Per_Filtrate_c * Filtrate_V_m3312.0 kg
Quadratic Cake Time t_cake (min)(((mu*alpha*c)/(2*A^2*dP)) * V^2) / 6010.59 min (29.90 min @ un-flocculated fines)
Linear Cloth Time t_cloth (min)(((mu * Rm) / (A * dP)) * V) / 600.54 min
Total Filtration Cycle Time (min)Cake_Time_min + Cloth_Time_min11.13 min (30.44 min bottleneck @ 24e10)

Ruth Parabolic (t/V vs V) Constant-Pressure Cake + Medium Filtration Formula

Validate Area A > 0.1 m², Pressure Delta_P > 10 kPa, Viscosity mu > 0.1 mPa·s, Specific_Cake_Resistance alpha > 0, Solids c > 0.5 kg/m³, Cloth R_m >= 0, and Filtrate_Volume V > 0 m³.

=LET(af_m, B2, dp_p, B3 * 1000, mu_p, B4 * 0.001, al_m, B5 * 10000000000, cs_k, B6, rm_i, B7 * 10000000000, vf_m, B8, tc_s, ((mu_p * al_m * cs_k) / (2 * (af_m ^ 2) * dp_p)) * (vf_m ^ 2), tm_s, ((mu_p * rm_i) / (af_m * dp_p)) * vf_m, IF(OR(af_m <= 0.1, B3 <= 10, B4 <= 0.1, B5 <= 0, cs_k <= 0.5, B7 < 0, vf_m <= 0), "Invalid Filtration Input", ROUND((tc_s + tm_s) / 60, 2)))

Over-Agitated Sheared Crystal Fines (alpha = 24.0 x 10^10 m/kg) Cycle Bottleneck Check (Set alpha B5 = 24.0)

Shear crystal agglomerates with a high-RPM centrifugal transfer pump (alpha jumps nearly 3x to B5 = 24.0): Cake Time E3 balloons from 10.59 to 29.90 min (Total = 30.44 min in E5)—proving why gentle low-shear diaphragm feed pumps and diatomaceous-earth body-feed filter aids pay back immediately.

=IF(ISTEXT(E5), E5, LET(dp_p, B3 * 1000, mu_p, B4 * 0.001, al_m, B5 * 10000000000, ROUND((((mu_p * al_m * B6) / (2 * (B2 ^ 2) * dp_p)) * (B8 ^ 2)) / 60, 2)))

Try the example

Use the original values or change them to test your understanding.

Further reading