Arte SheetsLearn. Try. Understand.

Healthcare & Clinical Calculations

Sampson–NIH LDL-C Equation: An Estimated Value

Calculate the 2020 Sampson–NIH LDL-C estimate with fictional lipid values and compare it with a Friedewald estimate when appropriate.

An estimate is not a direct measurement

Sampson and colleagues proposed a 2020 equation to estimate LDL cholesterol from total cholesterol, HDL cholesterol and triglycerides. The equation was compared with a reference method in study data including triglycerides up to 800 mg/dL. It may improve estimation in some settings, but neither this formula nor Friedewald provides the “true” measured LDL-C for an individual.

Different equations can produce different results; the difference between them is not the error relative to a reference measurement. Method selection, unusual lipid patterns and treatment decisions require laboratory and clinical interpretation.

Fictional inputSampson estimateFriedewald estimate
Total cholesterol 210, HDL 42, TG 280 mg/dL119.0 mg/dL112.0 mg/dL

Sampson–NIH equation 2

With total cholesterol in B2, HDL-C in B3 and triglycerides in B4, all in mg/dL, non-HDL-C is B2−B3. This example accepts positive values with total cholesterol greater than HDL and triglycerides no higher than 800 mg/dL. It rejects a negative calculated result; these basic checks do not establish physiological plausibility or clinical suitability.

=IF(COUNT(B2:B4)<>3,"Enter valid numeric lipid values in mg/dL",IF(OR(B3<=0,B2<=B3,B4<=0),"Enter valid numeric lipid values in mg/dL",IF(B4>800,"Triglycerides above the studied example range",IF(((B2/0.948)-(B3/0.971)-((B4/8.56)+(B4*(B2-B3)/2140)-(B4^2/16100))-9.44)<0,"Negative estimate: check inputs and consult the laboratory",ROUND(((B2/0.948)-(B3/0.971)-((B4/8.56)+(B4*(B2-B3)/2140)-(B4^2/16100))-9.44),1)))))

Compare two estimates

The second expression subtracts Friedewald’s estimate from the Sampson estimate before rounding. It reports the signed difference rather than an assumed underestimation. For this comparison, triglycerides must be below 400 mg/dL because the original Friedewald equation is not validated at 400 mg/dL or above; negative estimates are not reported.

=IF(COUNT(B2:B4)<>3,"Enter valid numeric lipid values in mg/dL",IF(OR(B3<=0,B2<=B3,B4<=0),"Enter valid numeric lipid values in mg/dL",IF(B4>=400,"Friedewald comparison not offered at TG 400 mg/dL or above",IF(OR(((B2/0.948)-(B3/0.971)-((B4/8.56)+(B4*(B2-B3)/2140)-(B4^2/16100))-9.44)<0,(B2-B3-B4/5)<0),"Negative estimate: check inputs and consult the laboratory",ROUND(((B2/0.948)-(B3/0.971)-((B4/8.56)+(B4*(B2-B3)/2140)-(B4^2/16100))-9.44)-(B2-B3-B4/5),1)))))

Use laboratory context

A value outside this example’s range does not automatically mandate a particular measurement method. Follow the reporting laboratory’s current policy and qualified clinical guidance.

Try the example

Use the original values or change them to test your understanding.

Further reading