Arte SheetsLearn. Try. Understand.

Aggregate Quarry & Mineral Comminution, Symons / Hydrocone Parallel-Zone Kinematics

Cone Crusher CSS, Eccentric Throw & Parallel-Zone Capacity

Calculate Open-Side Setting OSS (mm), Gravity Free-Fall Drop Per Half-Cycle (mm), Parallel-Zone Compression Hits, and Choke-Fed Volumetric Throughput (t/h).

Slowing a VFD cone crusher from 265 to 175 RPM boosts raw tonnage to 180 t/h—by letting uncrushed oversize slabs fall clear through the parallel zone in 1.15 hits

Secondary and Tertiary Symons / Hydrocone Gyratory-Cone Crushers (Mantle Base Diameter D m, Closed-Side Setting CSS mm, Full Eccentric Throw e mm -> Open-Side Setting OSS = CSS + e mm) produce cubical asphalt/concrete aggregate ONLY when rock fragments receive >= 2.0–3.0 interparticle compression nips inside the lower Parallel Sizing Zone (Length L_p mm). During the tfall = 30 / N (seconds) retreating half-revolution at Eccentric Speed N (RPM), gravity accelerates rock downward by **Free-Fall Stroke sdrop = (0.5 * g * (30 / N)^2) * 1,000 (mm), giving Parallel-Zone Compression Events nhits = L_p / sdrop and Choke-Fed Ribbon Throughput Q = 0.42 * pi * D * ((CSS + e / 2) / 1,000) * (sdrop / 1,000) * N * 60 * rho_b** (t/h at Chamber Void/Swell Factor 0.42 and Bulk Density rho_b t/m³). Turn VFD speed down too far (175 RPM) and sdrop (144.1 mm) nearly equals the entire 165 mm parallel zone (1.15 hits)—flooding recycle screens with flaky OSS-sized (55 mm) slabs.

Verify on a 1,520 mm (5-ft) Secondary Standard Cone Crusher—Mantle_Base_Diameter D = 1.52 m (B2), Closed_Side_Setting CSS = 19.0 mm (B3), Eccentric_Throw e = 36.0 mm (B4), Eccentric_Speed N = 265 RPM (B5), Parallel_Zone_Length L_p = 165 mm (B6), and Loose_Ore_Bulk_Density rho_b = 1.60 t/m³ (B7): Open-Side Setting OSS equals 55.0 mm (E2), Half-Cycle Free-Fall Drop equals 62.84 mm (E3), Parallel-Zone Compression Hits equal 2.63 (>= 2.0 cubical product. E4), and Choke-Fed Capacity equals 118.6 t/h (E5).

Cone Crusher Kinematics KPI (D=1.52 m, CSS=19 mm, Throw=36 mm, Lp=165 mm)FormulaVerified Output
Open-Side Setting OSS (mm)Closed_Side_CSS_mm + Eccentric_Throw_e_mm55.0 mm
Half-Cycle Free-Fall Drop (mm)(0.5 * 9.80665 * ((30 / RPM) ^ 2)) * 100062.84 mm (144.10 mm @ 175 RPM)
Parallel-Zone Nip HitsParallel_Zone_L_mm / Free_Fall_Drop_mm2.63 CUBICAL (1.15 SLAB BYPASS)
Choke-Fed Throughput (t/h)0.42 * PI * D * MeanGap * Drop * RPM * 60 * rho118.6 t/h graded (179.6 t/h ungraded)

Symons / Svensson Cone Crusher Free-Fall Ribbon & Parallel-Zone Hit Formula

Validate Mantle_Diameter D in [0.6, 3.2] m, CSS in [4, 75] mm, Eccentric_Throw e in [10, 90] mm, Eccentric_Speed N in [140, 450] RPM, Parallel_Zone L_p in [50, 450] mm, and Bulk_Density in [1.1, 3.2] t/m³.

=LET(dm_m, B2, cs_m, B3, th_m, B4, nr_p, B5, lp_m, B6, rb_t, B7, dp_m, 0.5 * 9.80665 * ((30 / nr_p) ^ 2), IF(OR(dm_m < 0.6, dm_m > 3.2, cs_m < 4, cs_m > 75, th_m < 10, th_m > 90, nr_p < 140, nr_p > 450, lp_m < 50, lp_m > 450, rb_t < 1.1, rb_t > 3.2), "Invalid Cone Input", ROUND(0.42 * PI() * dm_m * ((cs_m + th_m / 2) / 1000) * dp_m * nr_p * 60 * rb_t, 1)))

Under-Speed VFD Operation (N = 175 RPM) Oversize Circulating-Load Surge Check

Slow the countershaft drive so eccentric speed drops to B5 = 175 RPM: Free-Fall Drop E3 jumps to 144.10 mm, slashing Parallel-Zone Hits E4 to 1.15 while apparent chamber discharge E5 climbs to 179.6 t/h—nearly half of which bounces right off the 22 mm closing screen back into the crusher bowl.

=IF(ISTEXT(E5), E5, LET(dp_m, (0.5 * 9.80665 * ((30 / B5) ^ 2)) * 1000, ROUND(B6 / dp_m, 2)))

Try the example

Use the original values or change them to test your understanding.

Further reading