Arte SheetsLearn. Try. Understand.

Food & Beverage Science, SCA Coffee Brewing Control Chart, TDS & Extraction Yield

Coffee TDS, Extraction Yield (EY %) & Brew Ratio Formula

Calculate Pour-Over & Espresso Water-to-Coffee Input Ratio, Spent-Puck Liquid Retained Ratio LRR (g/g), Extracted Coffee Solubles (g), and SCA Extraction Yield EY (%).

Why a 9.8% TDS espresso shot and a 1.42% TDS V60 pour-over have the EXACT SAME 20.1% Extraction Yield

Roastery QC labs and Specialty Coffee Association (SCA) Brewing Control Charts separate Beverage Strength (Refractometer Total Dissolved Solids TDS%, 1.20%–1.55% filter coffee vs 8%–12% espresso) from Extraction Yield EY% (the mass percentage of dry roasted coffee grounds D g dissolved into the cup—targeting the 18%–22% sweet-spot window between sour <18% under-extraction and astringent >22% channeling). Because spent cellulose coffee grounds sponge up LRR = (Win - Bout) / D (~2.0–2.2 g/g in drip beds vs ~1.2–1.5 g/g in pressurized espresso pucks), multiplying TDS% by Input Pour Water Win instead of Actual Beverage Weight Bout (g) overpredicts EY% by +15%. True mass conservation uses **Extracted_Solubles = Bout * (TDS% / 100) (g) and EY% = ((Bout * (TDS% / 100)) / D) * 100**.

Verify on an SCA V60 Filter Calibration—Dry_Coffee_Dose D = 18.5 g (B2), Pour_Water_Input Win = 300.0 g (B3 -> Input Ratio = 16.22 : 1 in E2), Brewed_Beverage_Out Bout = 262.0 g (B4 -> Spent-Bed Liquid Retained LRR = 2.05 g/g in E3), and Digital_Refractometer TDS = 1.42% (B5): Extracted Solubles equal 3.72 g (E4) and Extraction Yield hits the dead-center SCA sweet spot at 20.11% (E5).

SCA Coffee Extraction KPI (Dose=18.5 g: 300g/262g @ 1.42% Filter vs 65g/38g @ 9.80% Espresso)FormulaVerified Output
Water-to-Coffee Input RatioPour_Water_In_g / Dry_Dose_g16.22 : 1 (3.51 : 1 @ espresso)
Liquid Retained Ratio LRR (g/g)(Pour_Water_In_g - Beverage_Out_g) / Dose_g2.05 g/g (1.46 g/g @ espresso puck)
Extracted Coffee Solubles (g)Beverage_Yield_Out_g * (TDS_Pct / 100)3.72 g (3.72 g identical solubles)
Extraction Yield EY (%)(Extracted_Solubles_g / Dry_Dose_g) * 10020.11% (20.13% identical sweet spot)

SCA Beverage-Out Mass Balance Extraction Yield & Liquid Retention Formula

Validate Dry_Dose D > 2 g, Beverage_Out Bout > 5 g, Pour_Water Win > Bout, and Refractometer_TDS in (0.3%, 20.0%].

=LET(dc_g, B2, wi_g, B3, bo_g, B4, td_p, B5, ex_g, bo_g * (td_p / 100), IF(OR(dc_g <= 2, bo_g <= 5, wi_g <= bo_g, td_p <= 0.3, td_p > 20), "Invalid Brew Input", ROUND((ex_g / dc_g) * 100, 2)))

9-Bar Espresso 1:2.05 Shot Equivalence Check (Set Water B3 = 65 g, Out B4 = 38 g, TDS B5 = 9.8%)

Pull the same 18.5 g roast as a 38.0 g espresso (B3 = 65, B4 = 38, B5 = 9.8): Input Ratio E2 tightens to 3.51, Puck Retention E3 drops to 1.46 g/g, yet Extracted Solubles E4 stay 3.72 g and Extraction Yield E5 matches at 20.13%—proving strength (TDS%) and extraction (EY%) are orthogonal axes.

=IF(ISTEXT(E5), E5, ROUND((B3 - B4) / B2, 2))

Try the example

Use the original values or change them to test your understanding.

Further reading