Arte SheetsLearn. Try. Understand.

Healthcare & Clinical Formulas

Spetzler–Martin AVM Grades and Spetzler–Ponce Classes: An Example

Explore the five-point anatomical grading arithmetic and its three-class grouping while recognizing that imaging interpretation and treatment decisions require specialists.

What the surgical grading system describes

Spetzler and Martin proposed a grading system for brain arteriovenous malformations (AVMs) to help estimate risks associated with surgical removal. The commonly used numerical grades I–V add points for the largest nidus dimension, neurological eloquence of adjacent brain, and the pattern of venous drainage. The original 1986 paper also described a separate grade VI for lesions considered essentially inoperable; that designation is not produced by a 1–5 arithmetic sum.

The later Spetzler–Ponce grouping combines numerical grades I–II as class A, III as class B, and IV–V as class C. These grades describe anatomical surgical risk, not a universal instruction to operate, embolize, irradiate, or observe. Decisions depend on imaging, prior hemorrhage, patient circumstances, alternatives, and the expertise of the clinical team.

FeaturePoint assignment in the commonly used numerical grading
Largest nidus dimension<3 cm: 1; 3–6 cm: 2; >6 cm: 3
Adjacent eloquent brainNo: 0; yes: 1
Deep venous drainageNo: 0; yes: 1

Illustrate the numerical sum

Enter a fictional positive diameter in centimeters in B2 and binary flags in B3 and B4 for eloquence and deep drainage. A healthcare specialist must interpret actual imaging and determine these features; the example does not make that assessment.

All inputs must be numeric and both flags must be exactly 0 or 1. A blank or unknown flag cannot be silently treated as a negative finding. The numerical exercise does not produce the original separate grade VI.

=IF(COUNT(B2:B4)<>3,"Complete all three numeric inputs",IF(B2<=0,"Enter a positive size",IF(COUNTIF(B3:B4,0)+COUNTIF(B3:B4,1)<>2,"Use 0 or 1 for both flags",IF(B2<3,1,IF(B2<=6,2,3))+B3+B4)))

Illustrate the three-class grouping

The example maps a calculated numerical grade of 1–2 to A, 3 to B, and 4–5 to C. It is not validated for patient care and does not choose a treatment.

=IF(COUNT(B2:B4)<>3,"Complete all three numeric inputs",IF(B2<=0,"Enter a positive size",IF(COUNTIF(B3:B4,0)+COUNTIF(B3:B4,1)<>2,"Use 0 or 1 for both flags",IF((IF(B2<3,1,IF(B2<=6,2,3))+B3+B4)<=2,"Illustrative class A",IF((IF(B2<3,1,IF(B2<=6,2,3))+B3+B4)=3,"Illustrative class B","Illustrative class C")))))

Try the example

Use the original values or change them to test your understanding.

Further reading