Statistical & Clinical Analysis
Strong Ion Difference and Strong Ion Gap: Units and Worked Arithmetic
Explore apparent strong ion difference and a simplified strong ion gap approximation, including unit conversion, missing inputs and limitations.
What the expressions approximate
In the Stewart framework, a difference between strong cation and anion charges is used in the analysis of acid–base balance alongside carbon dioxide and weak acids. An apparent strong ion difference (SIDa) can be estimated from selected measured strong ions; a strong ion gap (SIG) compares SIDa with an estimate of the effective difference (SIDe). Different formulations and included ions affect the result.
For the example below SIDa uses sodium, potassium, ionized calcium and ionized magnesium minus chloride and lactate, all expressed as charge equivalents in mEq/L. SIDe is approximated from bicarbonate in mEq/L, albumin in g/L, phosphate in mmol/L, and pH. The difference is an estimate influenced by the measured ions and model assumptions; it is not a direct measurement of one particular unmeasured substance.
Ion concentrations must be converted consistently. For divalent ionized calcium or magnesium reported in mmol/L, multiply by 2 to express their charge in mEq/L; do not multiply again if the laboratory already reports mEq/L. Total calcium or total magnesium cannot simply be substituted for ionized measurements. Albumin in g/dL must be converted to g/L for this particular approximation.
A number or assumed reference range alone cannot diagnose the cause of an acid–base disorder. This workbook demonstrates arithmetic using fictional values and is not clinically validated.
Apparent strong ion difference
Enter the six charge-equivalent ion values in B2:B7 in mEq/L. The formula requires all six numeric values and rejects negatives. It does not need bicarbonate, albumin, phosphate or pH to perform this separate arithmetic.
=IF(COUNT(B2:B7)<>6,"Enter all six numeric ion values",IF(MIN(B2:B7)<0,"Check nonnegative ion values",ROUND((B2+B3+B4+B5)-(B6+B7),2)))Simplified strong ion gap
For the example, add bicarbonate B8 in mEq/L, albumin B9 in g/L, phosphate B10 in mmol/L and pH B11. The formula subtracts bicarbonate + albumin × (0.123 × pH − 0.631) + phosphate × (0.309 × pH − 0.469) from SIDa.
The pH range check is only a broad mathematical guard; it does not establish that a measurement is physiological or that the approximation is valid for a patient. Clinical interpretation requires appropriately collected laboratory values and professional judgment.
=IF(COUNT(B2:B11)<>10,"Enter all ten numeric inputs",IF(OR(MIN(B2:B10)<0,B11<=0,B11>14),"Check input values",ROUND(((B2+B3+B4+B5)-(B6+B7))-(B8+B9*(0.123*B11-0.631)+B10*(0.309*B11-0.469)),2)))Try the example
Use the original values or change them to test your understanding.