Arte SheetsLearn. Try. Understand.

Steam & Gas Turbines, Centrifugal Compressors & Martin Labyrinth Seal Leakage

Turbomachinery Labyrinth Seal Martin Leakage Formula

Calculate Annular Tooth-Tip Clearance Area (mm²), Martin Compressible Expansion-Throttling Factor, Parasitic Gas Leakage Mass Flow (kg/s), and Hourly Leakage Loss (kg/h).

How 12 non-contacting knife-edge labyrinth teeth choke high-pressure turbine leakage—and why a rotor rub doubles steam loss

At 10,000+ RPM and 620 K, contacting shaft seals burn up instantly—so steam turbines, aviation gas turbines, and centrifugal compressors rely on non-contacting Knife-Edge Labyrinth Seals of Shaft Diameter D (mm), Radial Tip Clearance c (~0.25–0.45 mm -> Annular Gap Area A_cl = PI() * D * c), and N sequential throttling cavities (N = 8–20 teeth). Each knife-edge converts static pressure head into a high-velocity wall jet whose kinetic energy dissipates as turbulent eddies inside the stepped pocket (Fanno-like isothermal enthalpy conservation T_0 = const). H. M. Martin derived the classic Compressible Labyrinth Leakage Equation fromUpstream P_1 to Downstream P_2 (r_p = P_2 / P_1): **dot_m = C_d * A_cl * (P_1 / SQRT(R_gas * T_1)) * SQRT((1 - r_p^2) / (N - LN(r_p)))** (kg/s).

Verify on a 12-Tooth Stepped-Stator Compressor Balance-Drum Labyrinth—Shaft_Diameter D = 160.0 mm (B2), Cold/Hot_Radial_Clearance c = 0.35 mm (B3 -> Annular Clearance Area = 175.93 mm² in E2), Upstream_Pressure P_1 = 18.0 bar(a) (1.8 MPa, B4), Balance-Line_Downstream P_2 = 3.0 bar(a) (r_p = 1/6, B5), Inlet_Gas_Temp T_1 = 620.0 K (B6), Specific_Gas_Constant R_g = 287.05 J/(kg·K) (B7), Knife_Teeth N = 12 (B8), and Stepped_Tooth_Discharge C_d = 0.72 (B9): Martin Expansion Factor equals 0.2655 (E3), throttling Parasitic Leakage to 0.1435 kg/s (E4 = 516.6 kg/h in E5).

Martin Labyrinth Seal KPI (D=160 mm, c=0.35 mm, 18 -> 3 bar(a), 620 K, N=12 Teeth)FormulaVerified Output
Annular Gap Area A_cl (mm²)PI() * Shaft_D_mm * Radial_c_mm175.93 mm² (376.99 mm² @ worn 0.75 mm)
Martin Expansion FactorSQRT((1 - (P2/P1)^2) / (N - LN(P2/P1)))0.2655
Parasitic Leakage Flow (kg/s)Cd * A_m2 * (P1_Pa/SQRT(R*T1)) * Factor0.1435 kg/s (0.3075 kg/s @ worn 0.75 mm)
Hourly Parasitic Loss (kg/h)Leakage_Mass_Flow_kg_s * 3600516.6 kg/h (1,107.0 kg/h = +114% loss)

H. M. Martin Multi-Tooth Compressible Labyrinth Leakage Formula

Validate Shaft_Diam D > 10 mm, Radial_Clearance c in (0.02, 5.0] mm, 0 < P_2 < P_1, Temp T_1 > 100 K, R_gas > 50 J/(kg·K), integer Teeth N >= 2, and C_d in [0.4, 1.0].

=LET(dm_m, B2 / 1000, cl_m, B3 / 1000, pu_p, B4 * 100000, pr_r, B5 / B4, tk_g, B6, rg_j, B7, nt_c, B8, cd_f, B9, ac_m, PI() * dm_m * cl_m, mf_t, SQRT((1 - (pr_r ^ 2)) / (nt_c - LN(pr_r))), ms_k, cd_f * ac_m * (pu_p / SQRT(rg_j * tk_g)) * mf_t, IF(OR(B2 <= 10, B3 <= 0.02, B3 > 5, B5 <= 0, B4 <= B5, tk_g <= 100, rg_j <= 50, nt_c < 2, cd_f < 0.4, cd_f > 1), "Invalid Labyrinth Input", ROUND(ms_k * 3600, 1)))

Critical-Speed Rotor Rub Worn Clearance (c = 0.75 mm) Efficiency Loss Check (Set Clearance B3 = 0.75 mm)

Let a startup critical-speed bow mushroom the aluminum/abradable knife tips from 0.35 mm out to 0.75 mm (B3 = 0.75): Annular Gap Area E2 widens to 376.99 mm², Parasitic Leakage E4 jumps +114% to 0.3075 kg/s (1,107.0 kg/h in E5)—costing ~1%–2% of stage polytropic efficiency until turnaround re-stripping.

=IF(ISTEXT(E5), E5, LET(ac_m, PI() * (B2 / 1000) * (B3 / 1000), pr_r, B5 / B4, mf_t, SQRT((1 - (pr_r ^ 2)) / (B8 - LN(pr_r))), ROUND(B9 * ac_m * ((B4 * 100000) / SQRT(B7 * B6)) * mf_t, 4)))

Try the example

Use the original values or change them to test your understanding.

Further reading