High-Vacuum & Mass Spectrometry Engineering, Kruger-Shapiro Turbomolecular Pump Physics
Turbomolecular Pump Compression Ratio & H2 Back-Streaming
Calculate Rotor Blade Linear Speed vb (m/s), Maxwell Most-Probable Molecular Speed vm (m/s), Blade-to-Molecular Speed Ratio, and Log10 Zero-Flow Compression Ratio log10(K0).
Why a turbomolecular pump with 100,000,000:1 compression on Nitrogen drops to ~160:1 on Hydrogen—letting H2 back-stream out of your roughing foreline
Turbomolecular Vacuum Pumps (TMPs) spin multi-stage slanted titanium/aluminum rotor blades (Rotational Speed N RPM, Mean Blade Radius R m -> **Linear Blade Velocity v_b = 2 * PI() * R * (N / 60) m/s, typically 380–500 m/s) in free molecular flow (Kn > 1) to bat gas molecules preferentially toward the backing foreline. By Kruger & Shapiro (1961) / Gaede Molecular-Drag Theory, Zero-Throughput Maximum Compression Ratio K_0 = Pfore / PUHV = EXP(G * (v_b / v_m))** (log10(K_0) = (G * (v_b / v_m)) / LN(10) across Multi-Stage Geometric Constant G) depends exponentially on the ratio of blade speed v_b to **Maxwell Most-Probable Thermal Speed v_m = SQRT((2 * Rgas * T) / (M / 1,000)) (m/s, where Rgas = 8.3144626 J/(mol·K) and Molar Mass M is in g/mol). Because v_m scales as 1 / SQRT(M), light Hydrogen (M = 2.016 g/mol, v_m = 1,560 m/s) zips 3.73x faster than Nitrogen (M = 28.01 g/mol, v_m = 418.5 m/s)—collapsing K_0 by six orders of magnitude** and making H_2 the dominant residual gas in every UHV system.
Verify on a 60,000 RPM magnetically levitated Turbomolecular Pump (R = 0.068 m) pumping 295 K Nitrogen (M = 28.01 g/mol) with Multi-Stage Geometric Factor G = 18.5 (B6): Blade Speed v_b reaches 427.3 m/s (E2), Nitrogen Molecular Speed v_m equals 418.5 m/s (E3), Speed Ratio v_b / v_m equals 1.021 (E4), and log10(K_0) = 8.20 (K_0 = 1.58 x 10⁸ compression ratio. E5).
| Kruger-Shapiro TMP Compression KPI (60,000 RPM, R=0.068 m, T=295 K, G=18.5) | Formula | Verified Output |
|---|---|---|
| Rotor Blade Linear Speed vb (m/s) | 2 * PI() * Mean_Radius_m * (RPM / 60) | 427.3 m/s |
| Most-Probable Gas Speed vm (m/s) | SQRT((2 * 8.3144626 * T_K) / (MW_g_mol / 1000)) | 418.5 m/s N2 (1,559.9 m/s H2) |
| Blade-to-Gas Speed Ratio (vb / vm) | Blade_Speed_vb / Molecular_Speed_vm | 1.021 N2 (0.274 H2 supersonic gas) |
| Log10 Max Compression log10(K0) | (Geom_G * (vb / vm)) / LN(10) | 8.20 -> 1.58x10⁸ N2 (2.20 -> 158x H2) |
Kruger-Shapiro Exponential Molecular Compression & Molar-Mass Scaling Formula
Validate Rotor_RPM in [5,000, 120,000], Mean_Radius R in [0.02, 0.30] m, safe sub-burst tip speed v_b <= 620 m/s, Molar_Mass M in [2.0, 350.0] g/mol, Gas_Temperature T in [77, 500] K, and Stage_Factor G in [3, 35].
=LET(nr_p, B2, rb_m, B3, mw_g, B4, tk_g, B5, gf_s, B6, vb_s, 2 * PI() * rb_m * (nr_p / 60), vm_s, SQRT((2 * 8.3144626 * tk_g) / (mw_g / 1000)), IF(OR(nr_p < 5000, nr_p > 120000, rb_m < 0.02, rb_m > 0.3, vb_s > 620, mw_g < 2, mw_g > 350, tk_g < 77, tk_g > 500, gf_s < 3, gf_s > 35), "Invalid TMP Input", ROUND((gf_s * (vb_s / vm_s)) / LN(10), 2)))Hydrogen (M = 2.016 g/mol) 6-Decade Compression Collapse Check (Set Gas MW B4 = 2.016)
Switch from Nitrogen (28.01 g/mol) to Molecular Hydrogen (B4 = 2.016 g/mol): Thermal Speed E3 jumps 3.73x to 1,559.9 m/s, Speed Ratio E4 drops to 0.274, and log10(K_0) E5 plunges from 8.20 down to 2.20 (K_0 ~= 158:1)—proving why UHV chambers need Holweck drag stages or dry two-stage backing pumps to hold foreline PH2 < 10⁻⁷ mbar.
=IF(ISTEXT(E5), E5, ROUND(SQRT((2 * 8.3144626 * B5) / (B4 / 1000)), 1))Try the example
Use the original values or change them to test your understanding.