Dairy Process Engineering, Van Slyke & Price Cheddar Cheese Yield & Milk Standardization
Van Slyke Cheddar Cheese Yield & Casein-Fat Formula
Calculate Milk Casein-to-Fat Ratio (C/F), Van Slyke Theoretical Cheese Yield (kg per 100 kg milk), Finished Curd Block Mass (kg), and Sweet Whey Mass Balance (kg).
Why 0.1% extra milk casein boosts Cheddar yield MORE than 0.1% butterfat—because para-casein micelles trap both fat globules AND bound moisture
Commercial Cheddar and Gouda creameries standardize incoming milk inside Stainless Coagulation Kettles to an optimal Casein-to-Fat Ratio C / F = Casein% / Fat% (0.64–0.70 for full-fat Cheddar, meeting >=50% Fat-in-Dry-Matter FDM without leaking uncaptured fat into whey). L. L. Van Slyke & W. V. Price established the industry-benchmark Cheese Yield Equation (kg finished cheese per 100 kg standardized milk): **Y% = ((0.93 * Fat% + (Casein% - 0.10)) * 1.09) / (1 - Moisture% / 100)—accounting for 93% fat retention in the curd matrix, 0.10% curd-fines/glycomacropeptide loss into whey, a 1.09 non-fat milk-solids & salt retention factor, and Finished Cheese Moisture Moisture% (<= 39.0% legal standard of identity for US Cheddar). Multiplying by Milk Kettle Batch Mmilk (kg) predicts Finished Cheese Yield Mcheese = Mmilk * (Y% / 100) (kg) and Drained Sweet Whey Mwhey = Mmilk - Mcheese** (kg).
Verify on an 18,000 kg Standardized Autumn Milk Coagulation Kettle—Standardized_Milk_Fat = 3.85% (B2), Intact_Milk_Casein = 2.54% (B3 -> C / F = 0.660 in E2), Target_Cheddar_Moisture = 37.5% (B4), and Standardized_Milk_Batch = 18,000 kg (B5): Van Slyke Cheese Yield hits 10.50 kg / 100 kg milk (E3), producing 1,890.0 kg of finished Cheddar blocks (E4) and 16,110.0 kg of sweet whey (E5).
| Van Slyke Cheddar Yield KPI (18,000 kg Milk Kettle: Autumn 3.85/2.54/37.5% vs Summer 3.40/2.22/35.0%) | Formula | Verified Output |
|---|---|---|
| Casein-to-Fat Ratio (C / F) | Milk_Casein_Pct / Milk_Fat_Pct | 0.660 (0.653 @ summer milk) |
| Van Slyke Cheese Yield (%) | ((0.93*Fat + (Casein -0.10))*1.09)/(1-Moist/100) | 10.50% (8.86% = -1.64% yield drop) |
| Finished Cheddar Curd Mass (kg) | Milk_Batch_kg * (Van_Slyke_Yield_Pct / 100) | 1,890.0 kg (1,594.4 kg = -295.6 kg loss) |
| Drained Sweet Whey Mass (kg) | Milk_Batch_kg - Finished_Cheese_Mass_kg | 16,110.0 kg (16,405.6 kg whey) |
Van Slyke & Price Cheese Yield, Casein-to-Fat Ratio & Whey Mass Balance Formula
Validate Milk_Fat in [2.0%, 6.5%], Milk_Casein in [1.5%, 4.5%], Target_Moisture in [28.0%, 55.0%], and Milk_Batch > 50 kg.
=LET(ft_p, B2, cs_p, B3, ms_p, B4, mk_k, B5, yl_p, ((0.93 * ft_p + (cs_p - 0.1)) * 1.09) / (1 - (ms_p / 100)), ch_k, mk_k * (yl_p / 100), IF(OR(ft_p < 2, ft_p > 6.5, cs_p < 1.5, cs_p > 4.5, ms_p < 28, ms_p > 55, mk_k <= 50), "Invalid Dairy Input", ROUND(mk_k - ch_k, 1)))Summer Heat-Stress Milk + Over-Dry 35.0% Curd Moisture Economic Loss Check
Process un-fortified summer milk (Fat B2 = 3.40%, Casein B3 = 2.22%) and over-stir curds down to 35.0% moisture (B4 = 35.0 instead of 37.5%): Van Slyke Yield E3 drops to 8.86% and Finished Cheddar E4 loses 295.6 kg per kettle (1,594.4 kg)—demonstrating why ultrafiltered (UF) milk-protein standardization and inline NIR moisture control are creamery profit essentials.
=IF(ISTEXT(E5), E5, ROUND(((0.93 * B2 + (B3 - 0.1)) * 1.09) / (1 - (B4 / 100)), 2))Try the example
Use the original values or change them to test your understanding.