Arte SheetsLearn. Try. Understand.

Vibratory Bowl & Pan Feeders, Packaging Automation & Granular Micro-Hopping Mechanics

Vibratory Feeder Throw Factor Gamma & Conveying Formula

Calculate Peak Trough Acceleration in Gs, Dimensionless Vertical Throw Factor Gamma = (a*omega²*SIN(beta))/g, Ideal Horizontal Peak Velocity (mm/s), and Effective Transport Speed (mm/s).

Vibratory feeders don’t slide parts—above Throw Factor Gamma > 1.0, parts micro-hop forward while the pan pulls back underneath

Electromagnetic 50/60 Hz packaging pan feeders and unbalanced-motor quarry grizzly feeders oscillate along an inclined leaf-spring Line of Action beta (~15°–30° above the horizontal trough) with Peak-to-Peak Stroke S (mm, so Single-Amplitude A = S / 2). Peak Linear Acceleration in gs is a_max / g = ((S / 2,000) * (2*PI()*f)^2) / 9.80665, while the Dimensionless Vertical Throw Number (Machine Factor) Gamma = (a_max / g) * SIN(beta_rad) compares peak upward pan deceleration against 1 g gravity. When Gamma <= 1.0, parts never leave the deck and merely shuffle by stick-slip friction; when 1.5 <= Gamma <= 3.3, parts launch into repeatable micro-ballistic hops once per cycle while the trough retracts beneath them (Gamma > 3.3 causes chaotic sub-harmonic bouncing), achieving Net Transport Speed v_actual = eta_tr * ((S / 2) * 2*PI()*f * COS(beta_rad)) (mm/s).

Verify on a 50 Hz Electromagnetic Weigh-Scale Pan Feeder—Peak_to_Peak_Stroke S = 1.40 mm (A = 0.70 mm, B2), Coil_Drive_Frequency f = 50.0 Hz (B3), Leaf_Spring_Drive_Angle beta = 20.0° (B4), and Material_Transport_Factor eta_tr = 0.78 (B5): Peak Deck Acceleration hits 7.04 g (E2), Vertical Throw Number Gamma = 2.41 sits squarely inside the [1.5, 3.3] synchronous micro-flight window (E3), Ideal Horizontal Deck Peak Velocity equals 206.6 mm/s (E4), and Effective Conveying Speed hits 161.2 mm/s (E5).

Vibratory Pan Feeder KPI (Stroke=1.40 mm p-p @ 50 Hz, Angle=20°, eta=0.78)FormulaVerified Output
Peak Deck Acceleration (g)((Stroke_mm/2000) * (2*PI()*Hz)^2) / 9.806657.04 g (2.26 g @ 0.45 mm dribble)
Vertical Throw Factor GammaPeak_Accel_g * SIN(Angle_deg * PI()/180)2.41 micro-hop (0.77 non-flight @ 0.45 mm)
Ideal Horizontal Velocity (mm/s)(Stroke_mm/2) * (2*PI()*Hz) * COS(beta)206.6 mm/s (66.4 mm/s @ 0.45 mm)
Effective Transport Speed (mm/s)Ideal_Horiz_mm_s * Transport_Eff161.2 mm/s (51.8 mm/s @ 0.45 mm)

Dimensionless Throw Number Gamma & Vibratory Trough Conveying Velocity Formula

Validate Stroke_p_p > 0 mm, Frequency in [5, 120] Hz, Drive_Angle beta in [5°, 45°], and Transport_Efficiency in (0, 1].

=LET(st_m, B2, fq_h, B3, bt_d, B4, ef_t, B5, IF(OR(st_m <= 0, fq_h < 5, fq_h > 120, bt_d < 5, bt_d > 45, ef_t <= 0, ef_t > 1), "Invalid Feeder Input", LET(om_r, 2 * PI() * fq_h, rd_b, bt_d * (PI() / 180), vi_m, (st_m / 2) * om_r * COS(rd_b), ROUND(vi_m * ef_t, 1))))

Fine-Dribble 0.45 mm Stroke Sub-Flight Sliding Transition Check (Set Stroke B2 = 0.45 mm)

Throttle SCR controller voltage for final checkweigher dribble feed (S B2 = 0.45 mm): Peak Deck Gs E2 drop to 2.26 g, Throw Factor Gamma E3 falls below unity to 0.77 (parts transition from micro-hopping to gentle friction-sliding without bouncing), and Transport Speed E5 slows smoothly to 51.8 mm/s.

=IF(ISTEXT(E5), E5, LET(am_m, B2 / 2000, om_r, 2 * PI() * B3, ag_p, (am_m * (om_r ^ 2)) / 9.80665, ROUND(ag_p * SIN(B4 * (PI() / 180)), 2)))

Try the example

Use the original values or change them to test your understanding.

Further reading