Arte SheetsLearn. Try. Understand.

Clinical Medicine & Physiology

Watson Total Body Water Equations: An Anthropometric Estimate

Explore the Watson adult total body water equations and distinguish a population estimate from an individual hydration measurement.

What the regression estimates

Watson, Watson and Batt derived equations to estimate adult total body water from published dilution measurements and anthropometric data for 458 men and 265 women. The published equations use age, height and weight for the male model and height and weight for the female model. These are population-derived estimates, not a direct measurement of an individual’s body water.

One use of estimated total body water is as an approximation of distribution volume in some dialysis calculations, but body composition, fluid status and disease can affect the relationship. The estimate alone does not establish whether a person is dehydrated or overhydrated and should not determine dialysis, sodium correction or medication dosing.

The original study used male and female categories to fit separate equations. The input options here select those historical models; they are not an assessment of gender identity or a complete description of a person’s physiology.

Calculate a fictional adult estimate

Choose M or F for the corresponding published model in B2, age in years in B3, height in centimeters in B4 and weight in kilograms in B5. Both models require adult age as an example-scope check even though the female equation has no age term.

The male equation is 2.447 − 0.09516 × age + 0.1074 × height + 0.3362 × weight; the female equation is −2.097 + 0.1069 × height + 0.2466 × weight. The output is in liters. A nonpositive estimate or one exceeding weight prompts review of this simplified example; the checks do not establish whether the model is suitable for an individual.

=IF(COUNT(B3:B5)<>3,"Enter numeric age, height and weight",IF(AND(UPPER(TRIM(B2&""))<>"M",UPPER(TRIM(B2&""))<>"F"),"Choose model M or F",IF(OR(B3<18,B4<=0,B5<=0),"Check adult age, height and weight",IF(OR((IF(UPPER(TRIM(B2&""))="M",2.447-0.09516*B3+0.1074*B4+0.3362*B5,-2.097+0.1069*B4+0.2466*B5))<=0,(IF(UPPER(TRIM(B2&""))="M",2.447-0.09516*B3+0.1074*B4+0.3362*B5,-2.097+0.1069*B4+0.2466*B5))>B5),"Review inputs and model applicability",ROUND(IF(UPPER(TRIM(B2&""))="M",2.447-0.09516*B3+0.1074*B4+0.3362*B5,-2.097+0.1069*B4+0.2466*B5),2)))))

Express the estimate relative to body weight

The optional ratio uses the unrounded estimated liters and approximates one liter of water as one kilogram to show a percentage of body weight. It remains a model-derived ratio, not a hydration diagnosis. The worksheet is educational and not clinically validated.

=IF(COUNT(B3:B5)<>3,"Enter numeric age, height and weight",IF(AND(UPPER(TRIM(B2&""))<>"M",UPPER(TRIM(B2&""))<>"F"),"Choose model M or F",IF(OR(B3<18,B4<=0,B5<=0),"Check adult age, height and weight",IF(OR((IF(UPPER(TRIM(B2&""))="M",2.447-0.09516*B3+0.1074*B4+0.3362*B5,-2.097+0.1069*B4+0.2466*B5))<=0,(IF(UPPER(TRIM(B2&""))="M",2.447-0.09516*B3+0.1074*B4+0.3362*B5,-2.097+0.1069*B4+0.2466*B5))>B5),"Review inputs and model applicability",ROUND(100*(IF(UPPER(TRIM(B2&""))="M",2.447-0.09516*B3+0.1074*B4+0.3362*B5,-2.097+0.1069*B4+0.2466*B5))/B5,1)))))

Try the example

Use the original values or change them to test your understanding.

Further reading