Arte SheetsLearn. Try. Understand.

Indoor Air Quality, Bioaerosols & Hospital Epidemiology

Wells–Riley Model: An Illustrative Airborne-Exposure Calculation

Calculate a simplified Wells–Riley quanta dose, model probability and expected cases while keeping the steady-state and well-mixed assumptions explicit.

A model with defined assumptions

The simplified Wells–Riley equation models airborne transmission as P = 1 − EXP(−I × q × p × t / Q). Here I is the number of infectious emitters, q is the assumed quanta generation per emitter per hour, p is susceptible breathing in m³/hour, t is hours of exposure and Q is the effective clean-air flow in m³/hour. The model is conditional on the assumptions and inputs; quanta generation is uncertain and varies by pathogen, person and activity.

This version assumes a well-mixed room, constant emission and ventilation, and a steady-state concentration throughout exposure. It does not capture initial buildup, short-range exposure, changing occupancy or every transmission route. Effective clean air depends on actual delivery, filtering and air-cleaning performance; this calculation alone does not establish compliance with ASHRAE 241 or a safe room.

Hypothetical clean airflow QModeled doseModeled probability per susceptibleExpected cases among 20
120 m³/hour0.50000.39357.87
1,500 m³/hour0.04000.03920.78

Calculate the modeled dose

Enter infectious emitters I in B2, quanta/hour q in B3, breathing m³/hour p in B4, exposure hours t in B5, effective clean-air flow m³/hour Q in B6 and susceptible people S in B7. Enter this formula in B8. The input checks validate only numerical arithmetic.

=IF(COUNT(B2:B7)<>6,"Enter all numeric inputs",IF(OR(B2<0,B2<>INT(B2),B3<0,B4<0,B5<0,B6<=0,B7<0,B7<>INT(B7)),"Check example inputs",B2*B3*B4*B5/B6))

Calculate the model probability

The result is conditional on the model and the assumed inputs. It is not an observed attack rate or a precise forecast for a particular person.

=IF(ISNUMBER(B8),ROUND(1-EXP(-B8),4),B8)

Calculate expected cases

Multiplying the same modeled probability by S gives an expected value, not an actual count. A value below one does not mean zero risk or certify ventilation as controlled; an expected value of one or more does not by itself identify a superspreading event. Use applicable ventilation guidance and qualified assessment for real settings.

=IF(ISNUMBER(B8),ROUND(B7*(1-EXP(-B8)),2),B8)

Try the example

Use the original values or change them to test your understanding.

Further reading